×
- Live Chat
- 1-888-726-6993
My Garage
My Account
Cart
Genuine Nissan 240SX Throttle Body
Fuel Injection Throttle Body- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
10 Throttle Bodies found
Nissan 240SX Throttle Body
Part Number: 16118-40F10$311.89 MSRP: $409.03Limited AvailabilityYou Save: $97.14 (24%)
Nissan 240SX Throttle Body
Particular model of Nissan 240SX cars is Throttle Body, which is responsible for the regulation of airflow into the car's engine with regard to the driver's accelerator pedal depression. As a spacer between the air cleaner and intake manifold, Throttle Body consists of a butterfly valve that controls the amount of air to be suctioned in through the opening it offers. He noted that earlier models relied on a Throttle Body Injection (TBI) system as the engine control system while the existing models apply multi-point fuel injection. Electronic throttle control also known as Electronic Throttle Control System (ETC) as replaced the mechanical throttle so as to increase the reliability and interconnect throttle operation with safety devises. Problems such as rough idle or stalling could be by either throttles bodies cleaning or replacement of the throttle bodies for the enhanced performance of the engine.
If you need any OEM Nissan 240SX Throttle Body, feel free to choose them out of our huge selection of genuine Nissan 240SX Throttle Body. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.
Nissan 240SX Throttle Body Parts Questions & Experts Answers
- Q: How to remove and install a throttle chamber on Nissan 240sx?A: Disconnect the negative battery cable and remove the intake duct from the throttle chamber. Disconnect and mark the vacuum hoses and the electrical harness connector from the throttle-chamber. Disconnect the accelerator cable from the throttle chamber. Remove the mounting bolts and the throttle chamber from the intake manifold (early years) or intake manifold collector assembly. To install, use a new gasket and reverse the removal procedures. Torque the throttle chamber bolts to 13-16ft. lbs. in two steps EVENLY. Adjust the throttle cable if necessary. Check the throttle for smooth operation and make sure the by-pass port is free from obstacles and is clean. Check to make sure the Idle speed adjusting screw moves smoothly. Do not touch the EGR vacuum port screw or, on some later models, the throttle valve stopper screw, as they are factory adjusted. Because of the sensitivity of the air flow meter, there cannot be any air leaks in the fuel system. Even the smallest leak could unbalance the system and affect the performance of the automobile. During every check pay attention to VACUUM HOSE connections, dipstick and oil filler cap for evidence of air leaks. Should you encounter any, take steps to correct the problem.
