How do you remove and install an air flow meter and air filter housing on Nissan 300ZX?

First of all, loosen the bolts that secure the air filter housing to the body. Next, disconnect the mass air flow sensor electrical connector by pulling the connector apart. Then, loosen the large hose clamps at each end of the mass air flow sensor and disconnect the sensor by removing the electrical connector end. Push the air filter housing forward and work the mass air flow sensor from the air tube. To install, work the mass air flow sensor into the air filter housing tube then work the other end onto the sensor and tighten all retaining bolts and hose clamps.

Genuine Nissan 300ZX Mass Air Flow Sensor

MAF Sensor Meter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Mass Air Flow Sensors found

View related parts
Nissan 300ZX Mass Air Flow
Part Number: 22680-30P00
$797.78 MSRP: $1223.08
You Save: $425.30 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: B2680-30P00
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1990-1996 Nissan 300ZX | GL, GLL | 6 Cyl 3.0L | VD30DTT, VG30D, VG30DTT
View related parts
Nissan 300ZX Mass Air Flow Sensor
Part Number: 22680-09P00
Product Specifications
- Other Name: Mass Air Flow
- Replaced by: 22680-24P00
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1984-1987 Nissan 300ZX | GL, GLL, SF, SS | 6 Cyl 3.0L | VG30, VG30T
View related parts
Nissan 300ZX Mass Air Flow Sensor
Part Number: 22680-24P00
Product Specifications
- Other Name: Mass Air Flow; Air Mass Sensor
- Replaces: 22680-09P00
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1984-1988 Nissan 300ZX | GL, GLL, SF, SS | 6 Cyl 3.0L | VG30, VG30T
View related parts
Nissan 300ZX Mass Air Flow Sensor Assembly
Part Number: 22680-25P00
Product Specifications
- Other Name: Meter Assy-Air Flow; Air Mass Sensor, Mass Air Flow Sensor
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1987-1989 Nissan 300ZX | GL, GLL, SF, SS | 6 Cyl 3.0L | VG30, VG30T

Nissan 300ZX Mass Air Flow Sensor

MAF or Mass Air Flow Sensor is also installed on Nissan 300ZX cars where its function focuses on the monitoring of the amount of air that gets into the engine to allow for optimum combustion. This information is then communicated to the Powertrain Control Module (PCM) which in turn varies the fuel injector timing in a bid to ensure the right air-fuel ratio is achieved. The Nissan 300ZX has employed Vane Meter (VAF) and Hot Wire sensors as variant types of a MAF sensor. Though the VAF sensor works efficiently, it often experiences airflow restrictions and mechanical wear while working whereas the Hot Wire sensor work more accurately and can also be easily tailored but this sensor is affected with contaminants only. The Mass Air Flow Sensor should be clean because if the air filter becomes full of dust, then it would cause the wrong air fuel ratio, which would lead to performance problem such as stalling or hesitation on acceleration. Changes made to the air intake system therefore require that a proper calibration of the MAF sensor is done so that the Nissan 300ZX can perform in the optimal manner.

If you need any OEM Nissan 300ZX Mass Air Flow Sensor, feel free to choose them out of our huge selection of genuine Nissan 300ZX Mass Air Flow Sensor. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan 300ZX Mass Air Flow Sensor Parts Questions & Experts Answers

Mass Air Flow Sensor
22680-09P00
Q: How do you remove and install an air flow meter and air filter housing on Nissan 300ZX?
A: First of all, loosen the bolts that secure the air filter housing to the body. Next, disconnect the mass air flow sensor electrical connector by pulling the connector apart. Then, loosen the large hose clamps at each end of the mass air flow sensor and disconnect the sensor by removing the electrical connector end. Push the air filter housing forward and work the mass air flow sensor from the air tube. To install, work the mass air flow sensor into the air filter housing tube then work the other end onto the sensor and tighten all retaining bolts and hose clamps.