Genuine Nissan 350Z Door Handle

Nissan 350Z Door Handle Parts Questions & Answers

• Front Door Outside Handle Assembly, Left
  80607-CD40C
  Q: How do you remove and reinstall the Door Lock Cylinder and handle on Nissan 350Z?

  A: First, to gain access to the door trim panel, it has to be pulled out then the door window glass is to be removed, then the window glass module assembly. Next, remove the door latch actuator rod from the handle and then the nuts or screws getting the latch out of the door and so finally the whole latch assembly will be detached. In case of their reinstallation, the manner should be commensurate and in the reverse order of that used in the removal process. Again perform the process of unbolting the door trim panel, the door window glass, and the assembly of window glass module. To disarm the outside handle, it is required to release the connection between the door latch actuator and the handle, extract the fasteners of the outside handle, and pull out the handle from the door before finally fixing it back through the reversal of the procedures followed.