How do you perform an operating check and replace the power brake booster on Nissan Altima?

To perform an operating check, depress the brake pedal several times with the engine off to ensure there's no change in the pedal reserve distance, then start the engine; if the pedal goes down slightly, operation is normal. For an airtightness check, start the engine and turn it off after one or two minutes, then depress the brake pedal slowly several times; if the pedal depresses less each time, the booster is airtight. While the engine is running, depress the brake pedal, stop the engine with the pedal depressed, and if there's no change in the pedal reserve travel after holding for 30 seconds, the booster is airtight. When replacing the power brake booster, which should not be disassembled due to its complexity and critical role in brake performance, first remove the air filter housing for clearance, then the master cylinder, relieve the fuel pressure and disconnect the fuel line, remove the cowl cover and strut brace, disconnect the vacuum hose from the booster, and for V6 models, remove the accelerator and brake pedals. Next, pull out the safety clip and remove the pin from the clevis to detach it from the brake pedal, then remove the four mounting nuts securing the booster to the firewall and take the booster out of the engine compartment. Before installing the new booster, measure the booster input rod length and adjust if necessary, then install it in reverse order of removal, ensuring a new gasket is used between the booster and the firewall. For adjustment, measure the distance between the power brake booster and the hole in the input rod clevis, compare it to the specified dimension, and if necessary, adjust the clevis before installing the booster, connecting it to the brake pedal, and securely tightening the nut.

Genuine Nissan Altima Brake Booster

Brake Power Booster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Brake Boosters found

View related parts
Nissan Altima Booster Assy-Brake
Part Number: 47210-9N00A
$198.41 MSRP: $287.05
You Save: $88.64 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster, Brake Booster, Power Booster
- Replaces: 47210-JA01A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2007-2013 Nissan Altima | Base, S, SE, SL, SR | 4 Cyl 2.5L, 6 Cyl 3.5L | QR25DE, VQ35DE
View related parts
Nissan Altima Booster Assy-Brake
Part Number: 47210-3TA0C
$110.42 MSRP: $167.97
You Save: $57.55 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster, Brake Booster, Power Booster
- Replaces: 47210-3TA0B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2015-2018 Nissan Altima | Base, Entry, S, S PDS, SL, SR, SV, SV Navigation, Tech | 4 Cyl 2.5L, 6 Cyl 3.5L | QR25DE, VQ35DE
View related parts
Nissan Altima Booster Assy-Brake
Part Number: 47210-3TA0A
$173.43 MSRP: $263.82
You Save: $90.39 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster, Brake Booster, Power Booster
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2013-2016 Nissan Altima | 25SL/Moon Roof, Base, Entry, S, S PDS, SL, SV, SV Navigation, Tech | 4 Cyl 2.5L, 6 Cyl 3.5L | QR25DE, VQ35DE
View related parts
Nissan Altima Booster Assy-Brake
Part Number: 47210-6CA0A
$234.91 MSRP: $357.33
You Save: $122.42 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster Assembly, Brake Booster
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2019-2024 Nissan Altima | Platinum, S, SL, SR, SV | 4 Cyl 2.0 L GAS, 4 Cyl 2.0L, 4 Cyl 2.5 L GAS, 4 Cyl 2.5L | KR20DDET, PR25DD
View related parts
Nissan Altima Booster Assy-Brake
Part Number: 47210-JA00A
$310.90 MSRP: $414.53
You Save: $103.63 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 47210-JA00B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2007-2008 Nissan Altima | Base, S | 4 Cyl 2.5L | QR25DE
View related parts
Nissan Altima Booster Assy-Brake
Part Number: 47210-JA01A
$198.41 MSRP: $287.05
You Save: $88.64 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 47210-9N00A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2007-2010 Nissan Altima | Base, S, SE, SL, SR | 4 Cyl 2.5L, 6 Cyl 3.5L | QR25DE, VQ35DE
View related parts
Nissan Altima Booster Assy-Brake
Part Number: 47210-8J010
Product Specifications
- Other Name: Booster Assembly, Brake Booster
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2002-2006 Nissan Altima | Base, S, SE, SE-R, SL | 4 Cyl 2.5L, 6 Cyl 3.5L | QR25DE, VQ35DE
View related parts
Nissan Altima Booster Assy-Brake
Part Number: 47210-8J015
Product Specifications
- Other Name: Booster Assembly, Brake Booster
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2002-2006 Nissan Altima | Base, S, SE, SE-R, SL | 4 Cyl 2.5L, 6 Cyl 3.5L | QR25DE, VQ35DE
View related parts
Nissan Altima Master Vacuum Assembly
Part Number: 47210-1Z210
Product Specifications
- Other Name: Booster Assy-Brake; Brake Booster
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2001 Nissan Altima | GLE, GXE, SE, XE | 4 Cyl 2.4L | KA24DE
View related parts
Nissan Altima Booster Assy-Brake
Part Number: 47210-1E500
Product Specifications
- Other Name: Booster Assembly, Brake Booster
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1993-2001 Nissan Altima | GLE, GXE, SE, XE | 4 Cyl 2.4L | KA24DE
View related parts
Nissan Altima Booster Assy-Brake
Part Number: 47210-1E600
Product Specifications
- Other Name: Brake Booster
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1993-1997 Nissan Altima | GLE, GXE, XE | 4 Cyl 2.4L | KA24DE

Nissan Altima Brake Booster

If you need any OEM Nissan Altima Brake Booster, feel free to choose them out of our huge selection of genuine Nissan Altima Brake Booster. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Altima Brake Booster Parts Questions & Experts Answers

Booster Assy-Brake
47210-9N00A
Q: How do you perform an operating check and replace the power brake booster on Nissan Altima?
A: To perform an operating check, depress the Brake Pedal several times with the engine off to ensure there's no change in the pedal reserve distance, then start the engine; if the pedal goes down slightly, operation is normal. For an airtightness check, start the engine and turn it off after one or two minutes, then depress the brake pedal slowly several times; if the pedal depresses less each time, the booster is airtight. While the engine is running, depress the brake pedal, stop the engine with the pedal depressed, and if there's no change in the pedal reserve travel after holding for 30 seconds, the booster is airtight. When replacing the power brake booster, which should not be disassembled due to its complexity and critical role in brake performance, first remove the air filter housing for clearance, then the master cylinder, relieve the fuel pressure and disconnect the fuel line, remove the cowl cover and strut brace, disconnect the vacuum hose from the booster, and for V6 models, remove the accelerator and brake pedals. Next, pull out the safety clip and remove the pin from the clevis to detach it from the brake pedal, then remove the four mounting nuts securing the booster to the firewall and take the booster out of the engine compartment. Before installing the new booster, measure the booster input rod length and adjust if necessary, then install it in reverse order of removal, ensuring a new gasket is used between the booster and the firewall. For adjustment, measure the distance between the power brake booster and the hole in the input rod clevis, compare it to the specified dimension, and if necessary, adjust the clevis before installing the booster, connecting it to the brake pedal, and securely tightening the nut.