How to remove and replace the ECT sensor in a Nissan Armada?

First of all, you can remove the engine cover, remove the air intake duct, and drain the engine coolant. Next, disconnect the electrical connector from the ECT sensor. The ECT sensor is placed on the inner side of the left cylinder head, near the front upper corner of the head. Using a new sealing washer, install the ECT sensor and tighten it to the torque. Refill the cooling system.

Genuine Nissan Armada Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Coolant Temperature Sensors found

View related parts
Nissan Armada Engine Coolant Temperature Sensor
Part Number: 22630-7Y000
$41.68 MSRP: $61.48
You Save: $19.80 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 22630-0M200
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2004-2015 Nissan Armada | LE, LE/SL, Platinum, SE, SE/SV | 8 Cyl 5.6L | VK56DE
View related parts
Nissan Armada Engine Coolant Temperature Sensor
Part Number: 22630-44B20
$32.92 MSRP: $47.13
You Save: $14.21 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: OIL TEMP
- Replaced by: 22630-ED000
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2017 Nissan Armada | Platinum, Platinum CP, SL, SV | 8 Cyl 5.6L | VK56VD
View related parts
Nissan Armada Engine Coolant Temperature Sensor
Part Number: 22630-JA10A
$12.45 MSRP: $16.60
You Save: $4.15 (25%)
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2018-2019 Nissan Armada | Platinum, Platinum CP, SL, SV | 8 Cyl 5.6L | VK56VD
View related parts
Nissan Armada Engine Coolant Temperature Sensor
Part Number: 22630-ED000
$31.95 MSRP: $47.13
You Save: $15.18 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: WATER TENP
- Replaces: 22630-71L00, 22630-44B20, 22630-44B10
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2020-2023 Nissan Armada | Midnight Edition, Platinum, Platinum Reserve, S, SL, SV | 8 Cyl 5.6 L GAS
- 2017 Nissan Armada | Platinum, Platinum CP, SL, SV | 8 Cyl 5.6L | VK56VD

Nissan Armada Coolant Temperature Sensor

The Coolant Temperature Sensor in Nissan Armada select stores information that demand cooler temperature to allow the engine to maintain correct temperatures. This sensor helps in measuring the coolant temperature that determines the efficiency and performance of the engine. In Armada models of different years, it is possible that different kinds of Coolant Temperature Sensors are used, although specific differences are not described. The primary function remains consistent: to deliver basic temperature values that define management processes of engines. This data is used to avoid overheating in the engine and the vehicle to run as expected hence the significance of the Coolant Temperature Sensor in the vehicle.

If you need any OEM Nissan Armada Coolant Temperature Sensor, feel free to choose them out of our huge selection of genuine Nissan Armada Coolant Temperature Sensor. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Armada Coolant Temperature Sensor Parts Questions & Experts Answers

Engine Coolant Temperature Sensor
22630-7Y000
Q: How to remove and replace the ECT sensor in a Nissan Armada?
A: First of all, you can remove the engine cover, remove the air intake duct, and drain the engine coolant. Next, disconnect the electrical connector from the ECT sensor. The ECT sensor is placed on the inner side of the left cylinder head, near the front upper corner of the head. Using a new sealing washer, install the ECT sensor and tighten it to the torque. Refill the cooling system.