How to remove and install the EVAP canister and purge control valve on Nissan Armada?

Remove the engine cover. Disconnect the electrical connector from the purge control solenoid valve. Loosen the hose clamps and disconnect the hoses from the purge control solenoid valve. Remove the purge control valve mounting fasteners and remove the purge valve from its mounting bracket. Installation is the reverse of removal. Raise the vehicle and support It securely on jackstands. The EVAP canister is located underneath the vehicle, to the rear of the fuel tank. Disconnect the EVAP hoses from the EVAP canister. Disconnect the electrical connector from the canister. Remove the fastener that secures the EVAP canister and remove the canister. Installation is the reverse of removal.

Genuine Nissan Armada Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Vapor Canisters found

View related parts
Nissan Armada CANISTER Assembly-EVAPORATION
Part Number: 14950-7S000
$333.94 MSRP: $445.25
You Save: $111.31 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Evaporative Emission Canister
- Replaced by: 14950-7S00A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2004-2009 Nissan Armada | LE, SE | 8 Cyl 5.6L | VK56DE
View related parts
Nissan Armada CANISTER Assembly E
Part Number: 14950-9FT0A
$202.36 MSRP: $269.82
You Save: $67.46 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter, Vapor Canister
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2021-2023 Nissan Armada | Midnight Edition, Platinum, S, SL, SV | 8 Cyl 5.6 L GAS
View related parts
Nissan Armada CANISTER Assembly E
Part Number: 14950-7S00A
$333.94 MSRP: $445.25
You Save: $111.31 (25%)
Product Specifications
- Other Name: Evaporative Emission Canister; Vapor Canister
- Replaces: 14950-7S000
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2017-2020 Nissan Armada | Platinum, Platinum CP, Platinum Reserve, SL, SV | 8 Cyl 5.6 L GAS, 8 Cyl 5.6L | VK56VD
- 2004-2015 Nissan Armada | LE, LE/SL, Platinum, SE, SE/SV | 8 Cyl 5.6L | VK56DE

Nissan Armada Vapor Canister

The Vapor Canister in Nissan Armada is used in EVAP system, which main purpose is to prevent the hydrocarbon emissions from evaporating into the atmosphere. Its operation is based on placing the fuel vapors into a sealed container; carbon or charcoal-containing canister that adsorbs these vapors using its activated charcoal. There is a purge valve that opens allowing the flow of both air and stored vapours into the engine whenever the engine is on. Subsequently, modifications of the Vapor Canister have been employed in various Armada versions, with upgrades for diagnosability in present day OBD II automobiles. These enhancements are features such as a canister vent solenoid, which assists in the identification of leaks in the system and a fuel tank pressure sensor. The main difference between the canisters is the availability of replaceable filters and elaborated diagnostic functions in new generation devices.

If you need any OEM Nissan Armada Vapor Canister, feel free to choose them out of our huge selection of genuine Nissan Armada Vapor Canister. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Armada Vapor Canister Parts Questions & Experts Answers

CANISTER Assembly-EVAPORATION
14950-7S000
Q: How to remove and install the EVAP canister and purge control valve on Nissan Armada?
A: Remove the engine cover. Disconnect the electrical connector from the purge control solenoid valve. Loosen the hose clamps and disconnect the hoses from the purge control solenoid valve. Remove the purge control valve mounting fasteners and remove the purge valve from its mounting bracket. Installation is the reverse of removal. Raise the vehicle and support It securely on jackstands. The EVAP canister is located underneath the vehicle, to the rear of the fuel tank. Disconnect the EVAP hoses from the EVAP canister. Disconnect the electrical connector from the canister. Remove the fastener that secures the EVAP canister and remove the canister. Installation is the reverse of removal.