How to replace Ambient Temperature Sensor,Blower Motor,Blower Motor Resistor and Heater Core of a heater system in a Nissan Juke?

For the resistor, detach the battery, remove the glovebox, disconnect the wiring connector, and remove the resistor. For control cables, remove the control panel, release the retaining clip, and replace the cable. For the heater air flap motors, remove the glovebox, disconnect the motor wiring connector, and replace the motor. To replace the heater matrix, remove necessary parts and slide the matrix out. When it comes to sensors, the ambient temperature sensor and sunlight sensor are mounted behind the bumper and on the facia, respectively.

Genuine Nissan Juke Ambient Temperature Sensor

Inside Outside Auto Thermometer Gauge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Ambient Temperature Sensors found

View related parts
Nissan Juke Sensor Assy-Ambient
Part Number: 27722-3RA0A
$43.02 MSRP: $67.90
You Save: $24.88 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 27722-15U00
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2017 Nissan Juke | Base, Luxury, Nismo, Nismors, S, SL, SV, Upper | 4 Cyl 1.6L | MR16DDT
View related parts
Nissan Juke Sensor-Ambient
Part Number: 27722-15U00
$43.02 MSRP: $67.90
You Save: $24.88 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assy-Ambient
- Replaced by: 27722-3RA0A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2013 Nissan Juke | Base, Luxury, S, SL, SV, Upper | 4 Cyl 1.6L | MR16DDT
View related parts
Nissan Juke Sensor-INCAR
Part Number: 27720-1KA0A
$44.58 MSRP: $59.43
You Save: $14.85 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor-In Car; In-Car Sensor, Temperature Sensor
- Replaces: 27720-1FA0A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2017 Nissan Juke | Luxury, Nismo, Nismors, SL, SV, Upper | 4 Cyl 1.6L | MR16DDT
View related parts
Nissan Juke Sensor-INCAR Floor
Part Number: 27720-1FA0A
$44.58 MSRP: $59.43
You Save: $14.85 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor-In Car
- Replaced by: 27720-1KA0A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2012 Nissan Juke | Luxury, SL, SV, Upper | 4 Cyl 1.6L | MR16DDT

Nissan Juke Ambient Temperature Sensor

With help of the Ambient Temperature Sensor, Nissan Juke cars become able to maximize their performance due to the accurate measurement of the temperature. This sensor assists the PCM to turn the air fuel mixture in order to support combustion in varied circumstance. Over the years, Nissan Juke employs different kinds of ambient temperature sensors taking into account the design of the vehicle as well as its performance. These sensors are used in calculating the prevailing air temperature and this is crucial for the PCM to give real time adjustment. Variations in sensor types may exist, but the primary function remains consistent: prevent fuel wastage and for improvement of the engine efficiency and performance. A bad Ambient Temperature Sensor results in poor acceleration response and wrong air-fuel ratio that explains why this component is crucial in the functionality of Nissan Juke.

If you need any OEM Nissan Juke Ambient Temperature Sensor, feel free to choose them out of our huge selection of genuine Nissan Juke Ambient Temperature Sensor. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Juke Ambient Temperature Sensor Parts Questions & Experts Answers

Sensor-INCAR Floor
27720-1FA0A
Q: How to replace Ambient Temperature Sensor,Blower Motor,Blower Motor Resistor and Heater Core of a heater system in a Nissan Juke?
A: For the resistor, detach the battery, remove the glovebox, disconnect the wiring connector, and remove the resistor. For control cables, remove the control panel, release the retaining clip, and replace the cable. For the heater air flap motors, remove the glovebox, disconnect the motor wiring connector, and replace the motor. To replace the heater matrix, remove necessary parts and slide the matrix out. When it comes to sensors, the ambient temperature sensor and sunlight sensor are mounted behind the bumper and on the facia, respectively.