How to remove A/C Accumulator,A/C Compressor,A/C Condenser,A/C Expansion Valve,Evaporator and HVAC Pressure Switch of an air conditioning system on Nissan Juke?

To remove the compressor, discharge the air conditioning system, remove the drivebelt, unscrew the refrigerant pipe retaining plates, disconnect the wiring, and remove the compressor. Drain oil if renewing. For refitting, lubricate new sealing rings, fit the pipes, reconnect the wiring, and refit the drivebelt. For the condenser, remove the front bumper, air guides, intercooler, disconnect the pipes, and remove the condenser. For the receiver/dryer, remove the bumper, air guide, bolts, and disconnect the pipes. For the pressure switch, disconnect the wiring, unscrew it, and replace the sealing ring. For the evaporator, remove the heater/ventilation housing, components within, and the evaporator cover. For the expansion valve, remove the cowl panel, disconnect pipes, undo the bolts, and remove it. Refit with new seals.

Genuine Nissan Juke Evaporator

A/C Evaporator Core

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Evaporators found

View related parts
Nissan Juke EVAPOLATOR Assembly-Front
Part Number: 27280-1FC2B
$594.99 MSRP: $912.18
You Save: $317.19 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Evaporator Assy-Front
- Position: Front
- Replaced by: 27280-1FC2C
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2016 Nissan Juke | Base, Luxury, Nismo, Nismors, S, SL, SV, Upper | 4 Cyl 1.6L | MR16DDT
View related parts
Nissan Juke Evaporator Assy-Front
Part Number: 27280-1FC2C
$594.99 MSRP: $912.18
You Save: $317.19 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Evaporator Core
- Position: Front
- Replaces: 27280-1FC2A, 27280-1FC2B, 27280-1FC0A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2017 Nissan Juke | Base, Luxury, Nismo, Nismors, S, SL, SV, Upper | 4 Cyl 1.6L | MR16DDT
View related parts
Nissan Juke EVAPOLATOR Assembly-Front
Part Number: 27280-1FC2A
$594.99 MSRP: $912.18
You Save: $317.19 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Evaporator Assy-Front
- Position: Front
- Replaced by: 27280-1FC2C
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011 Nissan Juke | Base, Luxury, S, SL, SV, Upper | 4 Cyl 1.6L | MR16DDT

Nissan Juke Evaporator

The Evaporator of Nissan Juke automobiles is one of the subassemblies within the A/C system that plays the critical role of cooling the air while changing the liquid refrigerant into a gaseous state. Sited on the bottom of the bonnet, the evaporator collaborates with the blower fan to emit heat to the refrigerant leading to cool air production in the cabin. Also, it must preheat and cool, dehumidify, and drain the moisture outside the vehicle, and it helps to warm up the cool liquid to change the state from gas to liquid. Considered an A/C component that is changed often because it develops leaks or corrodes, the Nissan Juke A/C Evaporator is important for making the vehicle's interior comfortable in hot weather.

If you need any OEM Nissan Juke Evaporator, feel free to choose them out of our huge selection of genuine Nissan Juke Evaporator. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Juke Evaporator Parts Questions & Experts Answers

EVAPOLATOR Assembly-Front
27280-1FC2B
Q: How to remove A/C Accumulator,A/C Compressor,A/C Condenser,A/C Expansion Valve,Evaporator and HVAC Pressure Switch of an air conditioning system on Nissan Juke?
A: To remove the compressor, discharge the air conditioning system, remove the drivebelt, unscrew the refrigerant pipe retaining plates, disconnect the wiring, and remove the compressor. Drain oil if renewing. For refitting, lubricate new sealing rings, fit the pipes, reconnect the wiring, and refit the drivebelt. For the condenser, remove the front bumper, air guides, intercooler, disconnect the pipes, and remove the condenser. For the receiver/dryer, remove the bumper, air guide, bolts, and disconnect the pipes. For the pressure switch, disconnect the wiring, unscrew it, and replace the sealing ring. For the evaporator, remove the heater/ventilation housing, components within, and the evaporator cover. For the expansion valve, remove the cowl panel, disconnect pipes, undo the bolts, and remove it. Refit with new seals.