How to check and replace the ignition switch and Ignition Lock Cylinder in Nissan Maxima?

This check procedure applies to 1999 and earlier models. Due to the complexity of the electrical system on later models, the switch should be diagnosed by a dealer service department or other qualified auto repair facility. First, disable the airbag system. Next, remove the driver's knee bolster and steering column covers. Disconnect the ignition switch electrical connector located about six inches down the column from the ignition switch. Check the connector for continuity between the indicated terminals with the key in each position. If the continuity is not as specified, replace the switch. Additionally, check the ignition lock cylinder in each position to ensure it isn't worn or loose and that the key position corresponds to the markings on the housing; if the ignition lock cylinder is faulty, the entire steering column lock assembly will need to be replaced. To replace the switch, access it by following the initial steps to disconnect the electrical connector and remove the switch mounting screws. Install the new switch and harness. The ignition lock cylinder cannot be replaced by itself; the whole housing must be replaced. Remove the shear-head bolts retaining the ignition switch/ignition lock cylinder assembly and separate the bracket halves from the steering column, which can be done by drilling out the bolts and using a screw extractor. Finally, place the new switch assembly in position, install the new shear-head bolts, and tighten them until the heads snap off, ensuring to center the airbag clockspring before installing the steering wheel.

Genuine Nissan Maxima Ignition Lock Cylinder

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

131 Ignition Lock Cylinders found

View related parts
Nissan Maxima Lock Steering
Part Number: 48700-9N00B
$753.75 MSRP: $1005.00
You Save: $251.25 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Set-Steering
- Replaces: 48700-JF00B, 48700-JF00D, 48700-JF00A, 48700-JF00C, 48700-9N00A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2009-2010 Nissan Maxima | S, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Lock Steering
Part Number: 48700-9N00A
$753.75 MSRP: $1005.00
You Save: $251.25 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Set-Steering
- Replaced by: 48700-9N00B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2009-2010 Nissan Maxima | S, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Lock Steering
Part Number: D8700-4L627
$742.29 MSRP: $989.72
You Save: $247.43 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Set-Steering
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1998-1999 Nissan Maxima | GLE, GXE, SE | 6 Cyl 3.0L | VQ30DE
View related parts
Nissan Maxima Lock Set-Steering
Part Number: D8700-6J028
$187.00 MSRP: $249.33
You Save: $62.33 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Lock Cylinder, Steering Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2001-2003 Nissan Maxima | SEL, SES | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Lock Set-Steering
Part Number: D8700-8J000
$530.64 MSRP: $707.52
You Save: $176.88 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Lock Cylinder, Steering Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2006-2007 Nissan Maxima | SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Key Set Cylinder Lock
Part Number: 99810-ZX81C
$41.68 MSRP: $60.62
You Save: $18.94 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Set-Cylinder Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2009-2014 Nissan Maxima | LE, Premium, Sport, SR, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Lock Steering
Part Number: D8700-40U11
$268.38 MSRP: $357.83
You Save: $89.45 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Set-Steering; Ignition Lock Cylinder, Steering Lock
- Replaces: 48700-40U10, 48700-40U85, D8700-40U85, 48700-40U26, D8700-41U10
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1995-1999 Nissan Maxima | GLE, GXE, SE | 6 Cyl 3.0L | VQ30DE
View related parts
Nissan Maxima Lock Set-Steering
Part Number: D8700-8J010
$500.00 MSRP: $666.67
You Save: $166.67 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ignition Lock Cylinder, Steering Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2006-2007 Nissan Maxima | SE | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Key Set-Cylinder Lock
Part Number: K9810-ZK31A
$125.78 MSRP: $182.95
You Save: $57.17 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2006-2008 Nissan Maxima | SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Lock Steering
Part Number: D8700-6J026
$250.00 MSRP: $333.33
You Save: $83.33 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Set-Steering; Ignition Lock Cylinder
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2000-2002 Nissan Maxima | GXE, SE, SES | 6 Cyl 3.0L | VQ30DE
View related parts
Nissan Maxima Lock Set-Steering
Part Number: 48700-40U25
$268.43 MSRP: $357.90
You Save: $89.47 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: D8700-40U01
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1995-1999 Nissan Maxima | GXE, SE | 6 Cyl 3.0L | VQ30DE
View related parts
Nissan Maxima Key Set-Cylinder Lock
Part Number: 99810-9DB1A
$23.01 MSRP: $33.47
You Save: $10.46 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2014 Nissan Maxima | LE, Premium, Sport, SR | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Key Set-Cylinder Lock
Part Number: 99810-9N11A
$23.70 MSRP: $34.47
You Save: $10.77 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2009-2010 Nissan Maxima | SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Key Set-Cylinder Lock
Part Number: 99810-9N01A
$27.25 MSRP: $39.64
You Save: $12.39 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2009-2010 Nissan Maxima | S, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Key Set-Cylinder Lock
Part Number: 99810-9N01C
$27.25 MSRP: $39.64
You Save: $12.39 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2009-2010 Nissan Maxima | S, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Key Set Cylinder Lock
Part Number: 99810-9DB0A
$40.84 MSRP: $59.40
You Save: $18.56 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Set-Cylinder Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2013-2014 Nissan Maxima | LE, Premium, Sport, SR | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Key Set Cylinder Lock
Part Number: 99810-ZX80A
$43.11 MSRP: $62.71
You Save: $19.60 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Set-Cylinder Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2013-2014 Nissan Maxima | LE, Premium, Sport, SR | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Key Set Cylinder Lock
Part Number: 99810-ZX81A
$43.65 MSRP: $63.49
You Save: $19.84 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Set-Cylinder Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2009-2014 Nissan Maxima | LE, Premium, Sport, SR, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Key Set-Cylinder Lock
Part Number: 99810-4RA0B
$44.01 MSRP: $64.02
You Save: $20.01 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2017-2019 Nissan Maxima | Platinum, S, SL, SR, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Key Set-Cylinder Lock
Part Number: 99810-9DA0A
$44.99 MSRP: $65.44
You Save: $20.45 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2013-2014 Nissan Maxima | S, SV | 6 Cyl 3.5L | VQ35DE

| Page 1 of 7 |Next >

1-20 of 131 Results

Nissan Maxima Ignition Lock Cylinder

The Nissan Maxima Ignition Lock Cylinder is one of the most important car components that defines the sensational performance of Nissan Maxima cars. This link is important in initiating the working of the engine where a driver is able to slot and twist the key in order to connect battery power to circuiting. Present Nissan Maxima model has gone through several generations where compatible models have been maintained while the car's security and efficiency has been boosted. As a matter of fact, the Ignition Lock Cylinder is quite useful when attempting to provide optimal protection for the Nissan Maxima and secure the car against theft. In the modern world, Nissan Maxima production also ensures the utilization of keyless ignition systems that enhance the automobile due to the reduction of the parts that require motion. Still, the Ignition Lock Cylinder in its classic perspective is more durable, stronger to such wears as tend to happen over a given period. For instance, the Nissan Maxima is recognized as a car with a sporty appearance and the 3.5L V6 engine also boosts the experience. The upgraded versions, the limited 40th Anniversary trim included are the features that make Nissan Maxima stand out in the auto market. In a nut shell, the Nissan Maxima Ignition Lock Cylinder reflects the company's determination of providing excellent and safe products that are designed to meet the customer satisfaction and expectations for a car.

If you need any OEM Nissan Maxima Ignition Lock Cylinder, feel free to choose them out of our huge selection of genuine Nissan Maxima Ignition Lock Cylinder. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Maxima Ignition Lock Cylinder Parts Questions & Experts Answers

Lock Steering
D8700-4L627
Q: How to check and replace the ignition switch and Ignition Lock Cylinder in Nissan Maxima?
A: This check procedure applies to 1999 and earlier models. Due to the complexity of the electrical system on later models, the switch should be diagnosed by a dealer service department or other qualified auto repair facility. First, disable the airbag system. Next, remove the driver's knee bolster and steering column covers. Disconnect the ignition switch electrical connector located about six inches down the column from the ignition switch. Check the connector for continuity between the indicated terminals with the key in each position. If the continuity is not as specified, replace the switch. Additionally, check the ignition lock cylinder in each position to ensure it isn't worn or loose and that the key position corresponds to the markings on the housing; if the ignition lock cylinder is faulty, the entire steering column lock assembly will need to be replaced. To replace the switch, access it by following the initial steps to disconnect the electrical connector and remove the switch mounting screws. Install the new switch and harness. The ignition lock cylinder cannot be replaced by itself; the whole housing must be replaced. Remove the shear-head bolts retaining the ignition switch/ignition lock cylinder assembly and separate the bracket halves from the steering column, which can be done by drilling out the bolts and using a screw extractor. Finally, place the new switch assembly in position, install the new shear-head bolts, and tighten them until the heads snap off, ensuring to center the airbag clockspring before installing the steering wheel.

Related Nissan Maxima Parts

Browse by Year