Genuine Nissan Murano Battery Cable

Nissan Murano Battery Cable Parts Questions & Answers

• Cable Assy-Battery Earth
  24080-CA000
  Q: How to remove and replace battery cables on Nissan Murano?

  A: Always remove the cables by detaching from the last battery terminal and connecting to the first terminal. Never use a tool to loosen cable clamps as this could short out the battery by accident. When replacing only the cable for the positive terminal, always remove negative cable from battery initially). Disconnect each of the old cables that operate to opposite ends of batteries. Take note of how each wire is routed before you disconnect any of them so that you can reinstall them properly. While replacing all your old cables be sure to take them with you when going to purchase new ones and replace them with ones that are exactly similar. Employ a wire brush in cleaning up the solenoid's or ground's thread from corrosion and rust. To save it from corrosion in future, put a thin layer of petroleum jelly or battery terminal corrosion inhibitor on threads. Clamp down on nuts/bolts very tightly attaching cables into solenoids/grounds. A new cable should be connected to battery without having to stretch it across any distance prior joining it with posts on batteries. The positive battery terminal should be connected first followed by grounding cable that must go to negative side of battery .