How do you remove and install the inside door handle, key lock cylinder, outside door handle, and door latch on Nissan Murano?

To remove the inside door handle, first take off the door trim panel, disconnect the actuator cable from the handle, and unscrew the handle from the backside of the door trim panel. Installation is the reverse of removal. For the key lock cylinder and outside door handle, begin by removing the door trim panel, then take out the door window glass and the door module assembly. Remove the rubber plug from the rear edge of the door to access the Torx bolt securing the key lock cylinder, and loosen the bolt without removing it completely. Disconnect the actuator rod connecting the key lock cylinder to the door latch assembly by popping off the clip and pushing the rod out. If removing the outside door handle, disconnect the upper end of the rod; if removing the latch assembly, disconnect the lower end. Pull the outside door handle to remove the lock cylinder assembly or the outside handle trim cap. To remove the outside handle, pull it out and slide it to the rear, then slide the mounting bracket toward the rear of the vehicle and pull it out of the door, disconnecting the actuator cable. Installation is the reverse of removal. For the door latch, remove the door trim panel, the door window glass, and the door module assembly. Detach the latch from the door by removing the Torx bolts from the rear edge and pulling the latch assembly out. Disconnect the electrical connector and the actuator cable from the door latch before removing the latch assembly. Installation is the reverse of removal.

Genuine Nissan Murano Door Lock Cylinder

Door Lock Cylinder Tumbler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Door Lock Cylinders found

View related parts
Nissan Murano Cylinder Set-Door Lock,LH
Part Number: H0601-3TA1A
$102.90 MSRP: $149.67
You Save: $46.77 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder & Key, Lock Cylinder
- Position: Driver side
- Replaces: 80601-3TA0A, 80601-3TA1A, H0601-3TA0A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2015-2024 Nissan Murano | Midnight Edition, Platinum, S, SL, SV | 4 Cyl 2.5L, 6 Cyl 3.5 L GAS, 6 Cyl 3.5L | QR25DER, VQ35DE
View related parts
Nissan Murano Cylinder Set-Door Lock,LH
Part Number: H0601-1AA1A
$181.24 MSRP: $263.62
You Save: $82.38 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder & Key, Lock Cylinder
- Position: Driver side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2008-2014 Nissan Murano | LE, LE/ROOF, S, SL, SL/ROOF, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Cylinder Set-Door Lock,LH
Part Number: H0601-CA00A
$175.84 MSRP: $255.76
You Save: $79.92 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder & Key, Lock Cylinder
- Position: Driver side
- Replaces: H0601-CA001, H0601-CA000
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2003-2007 Nissan Murano | S, SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Cylinder Set-Door Lock,L
Part Number: H0601-CA000
$175.84 MSRP: $255.76
You Save: $79.92 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Set-Door Lock,LH
- Position: Driver side
- Replaced by: H0601-CA00A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2003-2007 Nissan Murano | S, SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Cylinder Set-Trunk Lid Lock
Part Number: H4660-1GR0A
$300.94 MSRP: $485.11
You Save: $184.17 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Set-Trunk Lid Lock. This item is non-returnable.; Lock Cylinder
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2014 Nissan Murano | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Cylinder Set - Door Lock, LH
Part Number: H0601-3TA0A
$102.90 MSRP: $149.67
You Save: $46.77 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Set-Door Lock,LH
- Position: Driver side
- Replaced by: H0601-3TA1A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2015-2019 Nissan Murano | Platinum, S, SL, SV | 4 Cyl 2.5L, 6 Cyl 3.5L | QR25DER, VQ35DE
View related parts
Nissan Murano Cylinder Set - Door Lock, LH
Part Number: 80601-3TA0A
$102.90 MSRP: $149.67
You Save: $46.77 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Set-Door Lock,LH
- Position: Driver side
- Replaced by: H0601-3TA1A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2018 Nissan Murano | Platinum, S, SL, SV | 4 Cyl 2.5L, 6 Cyl 3.5L | QR25DER, VQ35DE
View related parts
Nissan Murano Cylinder Set-Door Lock,L
Part Number: H0601-CB800
Product Specifications
- Other Name: Cylinder Set-Door Lock,LH; Cylinder & Key, Lock Cylinder
- Position: Driver side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2004-2007 Nissan Murano | SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Cylinder Set-Door Lock,LH
Part Number: H0601-1AA0A
Product Specifications
- Other Name: Cylinder & Key
- Position: Driver side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2008-2009 Nissan Murano | LE, S, SL, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Cylinder Set-Door Lock,LH
Part Number: H0601-1GR1A
Product Specifications
- Other Name: Cylinder & Key, Lock Cylinder
- Position: Driver side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2014 Nissan Murano | 6 Cyl 3.5L | VQ35DE

Nissan Murano Door Lock Cylinder

If you need any OEM Nissan Murano Door Lock Cylinder, feel free to choose them out of our huge selection of genuine Nissan Murano Door Lock Cylinder. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Murano Door Lock Cylinder Parts Questions & Experts Answers

Cylinder Set-Door Lock,LH
H0601-CA00A
Q: How do you remove and install the inside door handle, key lock cylinder, outside door handle, and door latch on Nissan Murano?
A: To remove the inside door handle, first take off the door trim panel, disconnect the actuator cable from the handle, and unscrew the handle from the backside of the door trim panel. Installation is the reverse of removal. For the key lock cylinder and outside door handle, begin by removing the door trim panel, then take out the door window glass and the door module assembly. Remove the rubber plug from the rear edge of the door to access the Torx bolt securing the key lock cylinder, and loosen the bolt without removing it completely. Disconnect the actuator rod connecting the key lock cylinder to the door latch assembly by popping off the clip and pushing the rod out. If removing the outside door handle, disconnect the upper end of the rod; if removing the latch assembly, disconnect the lower end. Pull the outside door handle to remove the lock cylinder assembly or the outside handle trim cap. To remove the outside handle, pull it out and slide it to the rear, then slide the mounting bracket toward the rear of the vehicle and pull it out of the door, disconnecting the actuator cable. Installation is the reverse of removal. For the door latch, remove the door trim panel, the door window glass, and the door module assembly. Detach the latch from the door by removing the Torx bolts from the rear edge and pulling the latch assembly out. Disconnect the electrical connector and the actuator cable from the door latch before removing the latch assembly. Installation is the reverse of removal.