How do you perform an operating check and replace the power brake booster on Nissan Rogue?

To perform an operating check, depress the brake pedal several times with the engine off to ensure there's no change in the pedal reserve distance, then start the engine and depress the pedal; a slight drop indicates normal operation. For an airtightness check, start the engine and turn it off after one or two minutes, then slowly depress the brake pedal several times; if the pedal depresses less each time, the booster is airtight. While the engine is running, depress the brake pedal, stop the engine with the pedal depressed, and if there's no change in the pedal reserve travel after holding for 30 seconds, the booster is airtight. When replacing the power brake booster, which should not be disassembled due to its complexity and critical role in brake performance, first remove the battery, air filter housing, and intake duct, then disconnect the vacuum hose from the booster. Next, remove the master cylinder, driver's side knee bolster and support, and the knee bolster support bracket. Detach the clevis from the brake pedal by removing the pin and safety clip, disconnect the electrical connectors to the brake pedal switches, and remove the brake pedal assembly mounting nuts. For 2014 and later models (except Rogue Select), the brake pedal assembly can remain in place after removing the mounting nuts. For 2013 and earlier models and 2014 and later Rogue Select models, remove the remaining brake booster mounting nut, take out the booster, and separate the spacer. Before installing the new booster, measure the booster input rod length and adjust if necessary. Installation follows the reverse order of removal, ensuring a new gasket is used between the booster and the firewall. For adjustment on 2013 and earlier models and 2014 and later Rogue Select models, measure the distance between the power brake booster and the hole in the input rod clevis, compare it to the specified dimension, and if necessary, adjust the clevis before installation, connecting it to the brake pedal and tightening the nut securely.

Genuine Nissan Rogue Brake Booster

Brake Power Booster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Brake Boosters found

View related parts
Nissan Rogue Booster Assy-Brake
Part Number: 47210-4CU0A
$181.95 MSRP: $276.77
You Save: $94.82 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster, Brake Booster
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2014-2020 Nissan Rogue | S, SL, SL/Premium, SV, SV Premium | 4 Cyl 2.5 L GAS, 4 Cyl 2.5L | QR25DE
View related parts
Nissan Rogue Booster Assy-Brake
Part Number: D7210-4BA5A
$589.52 MSRP: $903.80
You Save: $314.28 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: D7210-4BA5C
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2017-2019 Nissan Rogue | S, SL, SV, SV Premium | 4 Cyl 2.5L | QR25DE
View related parts
Nissan Rogue Booster Assy-Brake
Part Number: D7210-4BA5C
$589.52 MSRP: $903.80
You Save: $314.28 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster, Brake Booster
- Replaces: D7210-4BA5A, D7210-4BA5B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2020 Nissan Rogue | S, SL, SV | 4 Cyl 2.5 L GAS
View related parts
Nissan Rogue Booster Assy-Brake
Part Number: D7210-4BA0A
$676.05 MSRP: $1036.47
You Save: $360.42 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster, Brake Booster
- Manufacturer Note: LABEL 46007-4BA2A
- Replaces: 47210-4BA0A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2014-2020 Nissan Rogue | S, SL, SV, SV Premium | 4 Cyl 2.5 L GAS, 4 Cyl 2.5L | QR25DE
View related parts
Nissan Rogue Master Vacuum Assembly
Part Number: D7210-JG22A
$616.13 MSRP: $944.58
You Save: $328.45 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster Assy-Brake; Booster, Brake Booster
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2010-2015 Nissan Rogue | S, SL, SV | 4 Cyl 2.5L | QR25DE
View related parts
Nissan Rogue Booster Assy-Brake
Part Number: 47210-6RR0A
$338.15 MSRP: $518.42
You Save: $180.27 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster, Brake Booster
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2021-2023 Nissan Rogue | Midnight Edition, Platinum, S, SL, SV | 3 Cyl 1.5 L GAS, 4 Cyl 2.5 L GAS
View related parts
Nissan Rogue Booster Assy-Brake
Part Number: 47210-4EH0J
$289.20 MSRP: $443.37
You Save: $154.17 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2017 Nissan Rogue | S, SL, SV, SV Premium | 4 Cyl 2.5L | QR25DE
View related parts
Nissan Rogue Booster Assy-Brake
Part Number: D7210-4BA5B
$589.52 MSRP: $903.80
You Save: $314.28 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: D7210-4BA5C
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2018-2019 Nissan Rogue | S, SV, SV Premium | 4 Cyl 2.5L | QR25DE
View related parts
Nissan Rogue Booster Assy-Brake
Part Number: 47210-4BA0A
$676.05 MSRP: $1036.47
You Save: $360.42 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: D7210-4BA0A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2014-2017 Nissan Rogue | S, SL, SV, SV Premium | 4 Cyl 2.5L | QR25DE
View related parts
Nissan Rogue Booster Assy-Brake
Part Number: D7210-JG20A
$507.01 MSRP: $676.02
You Save: $169.01 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster, Brake Booster
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2008-2011 Nissan Rogue | S, SL, SV | 4 Cyl 2.5L | QR25DE
View related parts
Nissan Rogue Booster Assy-Brake
Part Number: D7210-6RA0A
$405.14 MSRP: $621.12
You Save: $215.98 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2021-2023 Nissan Rogue | Midnight Edition, Platinum, S, SL, SV | 3 Cyl 1.5 L GAS, 4 Cyl 2.5 L GAS
View related parts
Nissan Rogue Booster Assy-Brake
Part Number: D7210-4BA0D
$423.70 MSRP: $538.03
You Save: $114.33 (22%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2018 Nissan Rogue | S, SL, SV, SV Premium | 4 Cyl 2.5L | QR25DE

Nissan Rogue Brake Booster

If you need any OEM Nissan Rogue Brake Booster, feel free to choose them out of our huge selection of genuine Nissan Rogue Brake Booster. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Rogue Brake Booster Parts Questions & Experts Answers

Booster Assy-Brake
47210-4CU0A
Q: How do you perform an operating check and replace the power brake booster on Nissan Rogue?
A: To perform an operating check, depress the Brake Pedal several times with the engine off to ensure there's no change in the pedal reserve distance, then start the engine and depress the pedal; a slight drop indicates normal operation. For an airtightness check, start the engine and turn it off after one or two minutes, then slowly depress the brake pedal several times; if the pedal depresses less each time, the booster is airtight. While the engine is running, depress the brake pedal, stop the engine with the pedal depressed, and if there's no change in the pedal reserve travel after holding for 30 seconds, the booster is airtight. When replacing the power brake booster, which should not be disassembled due to its complexity and critical role in brake performance, first remove the battery, air filter housing, and intake duct, then disconnect the vacuum hose from the booster. Next, remove the master cylinder, driver's side knee bolster and support, and the knee bolster support bracket. Detach the clevis from the brake pedal by removing the pin and safety clip, disconnect the electrical connectors to the brake pedal switches, and remove the brake pedal assembly mounting nuts. For 2014 and later models (except Rogue Select), the brake pedal assembly can remain in place after removing the mounting nuts. For 2013 and earlier models and 2014 and later Rogue Select models, remove the remaining brake booster mounting nut, take out the booster, and separate the spacer. Before installing the new booster, measure the booster input rod length and adjust if necessary. Installation follows the reverse order of removal, ensuring a new gasket is used between the booster and the firewall. For adjustment on 2013 and earlier models and 2014 and later Rogue Select models, measure the distance between the power brake booster and the hole in the input rod clevis, compare it to the specified dimension, and if necessary, adjust the clevis before installation, connecting it to the brake pedal and tightening the nut securely.

Related Nissan Rogue Parts

Browse by Year

2023 Brake Booster 2022 Brake Booster 2021 Brake Booster 2020 Brake Booster 2019 Brake Booster 2018 Brake Booster 2017 Brake Booster 2016 Brake Booster 2015 Brake Booster 2014 Brake Booster 2013 Brake Booster 2012 Brake Booster 2011 Brake Booster 2010 Brake Booster 2009 Brake Booster 2008 Brake Booster