×
- Live Chat
- 1-888-726-6993
My Garage
My Account
Cart
Genuine Nissan Rogue Water Pump
H2O Pump- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
10 Water Pumps found
Nissan Rogue Pump Assembly Water
Part Number: 21010-3TA0B$87.46 MSRP: $133.05You Save: $45.59 (35%)Ships in 1-3 Business Days
Nissan Rogue Pump Assy-Water
Part Number: 21010-3TS0A$93.71 MSRP: $142.53You Save: $48.82 (35%)Ships in 1-3 Business Days
Nissan Rogue Pump Kit-Water
Part Number: B1010-1KC0C$77.74 MSRP: $118.25You Save: $40.51 (35%)Ships in 1-3 Business Days
Nissan Rogue Pump Assembly Water
Part Number: B1010-6N21A$91.19 MSRP: $138.72You Save: $47.53 (35%)Ships in 1-3 Business Days
Nissan Rogue Motor Assy-Sub,Cooling
Part Number: 21580-4BC0A$696.34 MSRP: $928.45You Save: $232.11 (25%)Ships in 1-3 Business Days
Nissan Rogue Pump Assembly Water
Part Number: 21010-3RC2A$93.16 MSRP: $141.70You Save: $48.54 (35%)Ships in 1-3 Business Days
Nissan Rogue Pump Assy-Water
Part Number: 21010-6N226$91.19 MSRP: $138.72You Save: $47.53 (35%)Ships in 1-3 Business Days
Nissan Rogue Pump Kit-Water
Part Number: 21010-4BC0A$359.85 MSRP: $551.68You Save: $191.83 (35%)Ships in 1-3 Business Days
Nissan Rogue Pump Assy-Water
Part Number: 21010-3TA1B$106.21 MSRP: $161.57You Save: $55.36 (35%)Ships in 1-3 Business Days
Nissan Rogue Pump Assy-Water
Part Number: 21010-6RC0A$118.09 MSRP: $179.62You Save: $61.53 (35%)Ships in 1-3 Business Days
Nissan Rogue Water Pump
The Water Pump in Nissan Rogue vehicles is one of the vital tools that helps in the passing of coolant from the radiator to the engine and allows the coolant to absorb the heat produced by combustion process. Pumps that are widely used today are aluminum casting with a rotating shaft, a belt that is coupled with the crankshaft, and an impeller to circulate the coolant. One or more of the following symptoms may be indicative of a bad water pump: The presence of coolant leak, loud squealing noises due to worn shaft bearings and, over heating of the engine. You can upgrade your water pumps with better coolant flow features that include OE cast iron housings to tailor-made aluminum ones. Some of the benefits associated with electric water pumps include; getting rid of parasites, a coolant circulatory mechanism that does not depend on the number of RPMs of the engine, and the ability to cool the engine after shutdown.
If you need any OEM Nissan Rogue Water Pump, feel free to choose them out of our huge selection of genuine Nissan Rogue Water Pump. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.
Nissan Rogue Water Pump Parts Questions & Experts Answers
- Q: How to replace a water pump on a Nissan Rogue?A: Disconnect the cable from the negative terminal of the battery. Loosen the right front wheel lug nuts, raise the front of the vehicle and support it securely on jackstands. Remove the wheel. Drain the cooling system. If the coolant is relatively new, or is in good condition, save it and re-use it. On 2013 and earlier/2014 and later Rogue Select models, remove the drivebelt tensioner. Remove the alternator. Remove the water pump bolts and separate the pump from the pump housing. If the pump is stuck, gently tap it with a soft faced hammer to break the gasket seal. Be prepared for coolant spillage and avoid hitting or bumping the impeller against other parts during this procedure. Remove all old gasket material and clean the mating surfaces on the water pump and engine block. Inspect the pump. Replace the unit if there is dirt or debris on the water pump impeller, the impeller turns smoothly by hand, the shaft is not loose, or the shaft has excessive play. Tighten the pump-to-housing bolts to the torque values. The remainder of installation is the reverse of removal. Refill the cooling system. Reconnect the battery and perform the necessary re-learn procedures. Start the engine and check for any leaks. Re-check coolant fluid levels and add if necessary.
