×
- Live Chat
- 1-888-726-6993
My Garage
My Account
Cart
Genuine Nissan Xterra Wheel Cylinder
Brake Wheel Cylinder- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Wheel Cylinder found
Nissan Xterra Wheel Cylinder
The Wheel Cylinder in Nissan Xterra vehicles is an important part of the car that expands the hydraulic pressure so as to push the brake shoes against the brake drum so that the vehicle comes to a stop. This mechanism entails pistons situated in the cylinder that move outwards when the brake pressure is applied and this causes the shoes to confront the drum. The cylinder body is generally constructed from cast iron or aluminum and has cup seals, pistons within it with expander spring to exert pressure on the fluid prevent it from leaking. The function of the wheel cylinder is to improve the force exerted on the brake to produce considerable braking power needed for safe driving; if it is either damaged or has leakages, the force exerted will substantially reduce, it thus needs to be replaced or rebuilt. It is therefore important to commonly inspect and carry out a general check on the wheel cylinder so as to maximize the efficiency of the brakes at any given time while driving the Nissan Xterra vehicles.
If you need any OEM Nissan Xterra Wheel Cylinder, feel free to choose them out of our huge selection of genuine Nissan Xterra Wheel Cylinder. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.
Nissan Xterra Wheel Cylinder Parts Questions & Experts Answers
- Q: How to remove, clean, and reinstall the wheel cylinder on Nissan Xterra's rear brake system?A: Raise the rear of the vehicle and support it securely on jackstands. Block the front wheels to keep the vehicle from rolling. Remove the brake shoe assembly. Remove all dirt and foreign material from around the wheel cylinder. Disconnect the Brake Line with a flare-nut wrench, if available. Don't pull the brake line away from the wheel cylinder. Remove the wheel cylinder mounting bolts. Detach the wheel cylinder from the brake backing plate and place it on a clean workbench. Immediately plug the brake line to prevent fluid loss and contamination. Place the wheel cylinder in position and install the bolts finger tight. Connect the brake line to the cylinder, being careful not to cross-thread the fitting. Tighten the wheel cylinder bolts to the torque listed. Tighten the brake line securely and install the brake shoes. Bleed the brakes. Check the operation of the brakes carefully before driving the vehicle.
