Nissan 56200-7B025 ABSORBER Shock Rear

You can Select Your Vehicle to check if 56200-7B025 fits your vehicle.

The upper mounting nut should be installed finger tight, followed by the lower mounting nut bolt also installed finger tight.

Slide the dust boot off the damper shaft and check the lower insulator for wear, cracking, and hardness, replacing it if necessary.

To assess shock absorbers, park the vehicle on level ground with the engine off and the parking brake engaged. Check tire pressures and press down on each corner of the vehicle, observing its movement and rebound. The vehicle should come to rest in a level position within one or two bounces. If it continues to bounce or fails to return to its original position, it may indicate worn or weak shock absorbers. Repeat this test at the other three corners of the vehicle and raise it on jackstands to inspect the front struts and rear shock absorbers for fluid leakage, secure mounting, and damage. Replace the shocks as a set if leakage is found.

Guide the strut assembly up into the fenderwell and insert the upper mounting studs through the holes in the shock tower, ensuring the stud marked earlier goes into the designated hole in the strut tower.