Nissan 40210-2S600 Bearing Wheel Front

You can Select Your Vehicle to check if 40210-2S600 fits your vehicle.

After removing the wheel, you will need to take off the disc brake caliper and the caliper mounting bracket. Additionally, remove the front wheel speed sensors on ABS-equipped vehicles. On 4WD models, remove the free-running hub if present. For 2WD Frontier models, remove the hub cap, cotter pin, spindle nut, and thrust washer. On 4WD Frontier models and all Xterras and Pathfinders, you will need to remove the lockwasher screws, lockwasher, and locknut with a specialized tool, then pull the hub assembly off the spindle.

To remove the axle, start by removing the nuts that secure the axle retaining plate to the axle housing. Attach a slide hammer and an adapter to the axle flange and use the slide hammer to pull the axle from the housing.