Contact Us: Live Chat or 1-888-726-6993
My Garage
My Account
My Cart
Make sure this part fits your vehicle

Nissan 27200-9Z100 Blower Assy-Front

1999-2004 Nissan 272009Z100

Nissan 27200-9Z100 Blower Assy-Front
  • Part Description
    Blower Assy-Front
  • Lookup Code
    27020
  • Position
    Front
  • Replaces
    27200-7Z100
  • Manufacturer
    Nissan
  • Manufacturer's Notes
    This part is discontinued.
Customer Questions & Answers
  • Product Specifications

    BrandGenuine Nissan
    Lookup Code27020
    Manufacturer Part Number27200-9Z100
    Part DescriptionBlower Assy-Front
    Other NamesBlower Assembly
    Item Dimensions15.6 x 15.4 x 13.4 inches
    Item Weight9.90 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces27200-7Z100
    ManufacturerNissan
    SKU27200-9Z100
    WarrantyThis genuine Nissan part is guaranteed by Nissan's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Trim & Engine Important vehicle option details
    1999-2004 Nissan FrontierSC, SE, XE|4 Cyl 2.4L, 6 Cyl 3.3LKA24DE, VG33E
    2000-2004 Nissan XterraSE, XE|4 Cyl 2.4L, 6 Cyl 3.3LKA24DE, VG33E, VG33ER

Customer Questions & Answers

Q:
Does this part fit my vehicle? Posted by NissanPartsDeal Specialist
A:
You can Select Your Vehicle to check if 27200-9Z100 fits your vehicle.
Posted by NissanPartsDeal Specialist
Q:
How to troubleshoot addressing issues related to blower motor speed and operation in a Nissan Xterra's heating and cooling system? Posted by Customer
A:
If the blower motor speed does not correspond to the setting selected on the blower switch, or the blower motor does not operate at all, the problem could be a bad fuse, relay, switch, blower motor resistor, blower motor or blower motor circuit wiring. Always check the fuse and the blower relay first, then remove the glove compartment and lower dash trim to gain access to the heater case and blower motor. With the ignition key in the ON position, turn the blower switch to the faulty position(s) and, using a test light or voltmeter, check for voltage at the motor electrical connector. If the motor is receiving voltage but not operating, either the motor ground is bad (on these models the blower switch and resistor are part of the ground circuit) or the motor itself is faulty or the fan is binding. To check the fan, disconnect the electrical connector from the blower motor and connect a jumper wire between the ground wire terminal on the blower motor and a good chassis ground, then connect a fused jumper wire between the battery positive terminal and the positive terminal on the blower motor. If the motor now operates properly, the ground circuit or the blower resistor are bad. If the motor does not operate, the fan is either binding or faulty. To check the blower motor fan is binding, remove the blower motor. If the ground circuit to the motor is bad, check the blower resistor for continuity between the terminals. If any checks indicate infinite resistance, replace the blower resistor and retest the ground circuit. To check the blower speed switch, unplug the electrical connector from the blower switch and check the continuity across the indicated switch terminals with an ohmmeter. If continuity isn't as specified, replace the switch.
Posted by NissanPartsDeal Specialist
Q:
How can the reinstallation of the blower motor be completed for the 2001 Nissan Xterra? Posted by Customer
A:
To reinstall the blower motor, reverse the steps of removal. Make sure to follow these steps: Reattach the blower motor carefully into the housing. Secure the blower motor mounting screws. Reconnect the electrical connector to the blower motor. Reattach the blower motor vent hose.
Posted by NissanPartsDeal Specialist
Q:
What steps are involved in preparing to remove the blower motor for the 2000 Nissan Frontier? Posted by Customer
A:
The following steps are involved in preparing to remove the blower motor: Detach the blower motor vent hose. Disconnect the electrical connector from the blower motor.
Posted by NissanPartsDeal Specialist
See expert answers on similar Blower Motor
Q:
What steps should you take to determine if the blower motor ground circuit or blower resistor is faulty for the 2002 Nissan Frontier? Posted by Customer
A:
If the blower motor operates properly when jumpered as described earlier, you should check the blower motor ground circuit or the blower resistor. Check the blower resistor for continuity between its terminals. If there is infinite resistance, replace the blower resistor and then retest the ground circuit.
Posted by NissanPartsDeal Specialist
See expert answers on similar Blower Motor
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Nissan Part 27200-9Z100, the Right Choice

To ensure reliability, purchase Nissan part # 27200-9Z100 Blower Assy-Front. It is sometimes referred to as Nissan Blower Motor. OEM parts are the #1 choice in terms of quality. Crafted by Nissan, they follow rigorous factory specs and go through the demanding quality control processes during manufacturing. This part fits 1999-2004 Nissan Frontier, 2000-2004 Nissan Xterra.

NissanPartsDeal.com is a leading supplier of genuine Nissan parts and accessories such as Nissan 272009Z100 Blower Assy-Front. Welcome to our vast selection of competitively-priced genuine Nissan parts available online. Each OEM Nissan part we provide is backed by a manufacturer's warranty and is subject to a stress-free return policy. Place your order now and receive your parts quickly, shipped directly to your doorstep.

Why choose Nissan Parts Deal

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly