Nissan 47210-8B410 Booster Assy-Brake

You can Select Your Vehicle to check if 47210-8B410 fits your vehicle.

To replace the power brake booster, follow these steps: Remove the brake master cylinder. Disconnect the vacuum hose leading from the engine to the booster. Remove the under-dash panel. Remove the clevis pin retaining clip with pliers and pull out the clevis pin. Remove the four nuts holding the brake booster to the firewall. Slide the booster straight out from the firewall until the studs clear the holes. Measure the distance between the power brake booster and the hole in the clevis and compare it to the specified booster-to-clevis dimension. If the measurement isn't the same, loosen the adjusting nut and turn the clevis in or out to achieve the specified length. Then, tighten the nut.

The disc thickness should also be measured to ensure it still has service life remaining. Before installing the wheels, all brake lines and hoses should be checked for damage, wear, deformation, cracks, corrosion, leakage, bends, and twists.