Nissan 11253-JA000 Engine Mounting Bracket, Left

You can Select Your Vehicle to check if 11253-JA000 fits your vehicle.

Raise the vehicle and place it securely on jackstands. Insert a large screwdriver or pry bar between the mount and the bracket and pry against it; for checking a transaxle mount, place the tool between the mount and the bracket and attempt to lever the transaxle up and down. If there is excessive movement, the mount should be replaced. Ensure the rubber within the mount is not cracked or separated from the bushing in the center; if it is, the mount needs replacement. To replace a mount, support the transaxle with a jack, remove the nuts and bolts, and take out the mount, which may require slightly raising the transaxle for adequate clearance. Installation follows the reverse process of removal.

Remove the engine mount-to-chassis fasteners and the engine mount-to-engine mount bracket nut, then raise the engine slightly to remove the engine mount from the vehicle.

Carefully raise the engine just enough to relieve the weight on the mounts, avoiding placement of the wood block under the oil pan drain plug.