Nissan 34935-CA000 Control Cable Assembly

You can Select Your Vehicle to check if 34935-CA000 fits your vehicle.

To fine tune the shift lever, one has to dismantle the air filter housing. Next, engage the shift lever in the "P" position and also Released the shift cable-to-Manual lever locknut with the transaxle manual shift lever fully in park position. With the manual lever in position, tighten the locknut and then test the shift lever, moving it from "P" to "1", it should move easily. In replacement, engage the park and take out successively the air intake duct taking also the air filter housing, the battery, and the battery bracket. In the next step, the locknut of the cable-to-manual lever is released, the cable can be disconnected from the transaxle bracket by using a cable retaining clip and finally the center console is pulled out. Disconnect the cable end from the shifter, as well as the right front lower heater air duct before pulling out the cable from the automobile. Installation for the cable is the process of reversing removal, making sure the cable fits into the clips installed on the console-mounted shifter with its ribbed surface up and do not forget to shift the cable.