Contact Us: Live Chat or 1-888-726-6993
My Garage
My Account
My Cart
Make sure this part fits your vehicle

Nissan 13020-F4411 Camshaft Assy

1998-2001 Nissan 13020F4411

Nissan 13020-F4411 Camshaft Assy
  • Part Description
    Camshaft Assy
  • Lookup Code
    13020
  • Replaced By
    13020-9E001
  • Manufacturer
    Nissan
  • Manufacturer's Notes
    This part is discontinued.
Customer Questions & Answers
$256.26 MSRP: $341.68
You Save: $85.42 (25%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn’t currently available for ordering.

  • Product Specifications

    BrandGenuine Nissan
    Lookup Code13020
    Manufacturer Part Number13020-F4411
    Part DescriptionCamshaft Assy
    Item Dimensions21.3 x 5.3 x 4.2 inches
    Item Weight5.60 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerNissan
    SKU13020-F4411
    WarrantyThis genuine Nissan part is guaranteed by Nissan's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Trim & Engine Important vehicle option details
    1998-2001 Nissan FrontierSE, STD, XE|4 Cyl 2.4LKA24DE
    2000-2001 Nissan XterraXE|4 Cyl 2.4LKA24DE

Customer Questions & Answers

Q:
Will this part fit my car? Posted by NissanPartsDeal Specialist
A:
You can Select Your Vehicle to check if 13020-F4411 fits your vehicle.
Posted by NissanPartsDeal Specialist
Q:
How should you inspect the lifters for wear for the 2002 Nissan Xterra? Posted by Customer
A:
Inspect the lifters for wear while they are out of the engine.
Posted by NissanPartsDeal Specialist
See expert answers on similar Camshaft
Q:
What should be examined when inspecting the camshaft bearing surfaces, and what action is required if issues are found for the 2000 Nissan Xterra? Posted by Customer
A:
When inspecting the camshaft bearing surfaces, carefully look for signs of damage such as pitting, score marks, galling, or abnormal wear. If any of these issues are detected, the cylinder head will require replacement.
Posted by NissanPartsDeal Specialist
Q:
What should be done before installing the camshaft bearing caps for the 2001 Nissan Xterra? Posted by Customer
A:
Apply a bead of RTV sealant to the sealing surfaces of the No. 1 bearing cap(s) and the cylinder head. Install new O-rings on the secondary timing chain tensioner(s) and the VVT oil control orifice on the No. 1 bearing cap(s).
Posted by NissanPartsDeal Specialist
Q:
What should you do after installing the camshaft sprockets for the 2001 Nissan Xterra? Posted by Customer
A:
Install the camshaft sprocket bolts, ensuring they are correctly matched to the camshafts, and then tighten the bolts to the specified torque.
Posted by NissanPartsDeal Specialist
Q:
What action should be taken if lifter pads are found to be worn during inspection for the 2004 Nissan Frontier? Posted by Customer
A:
If lifter pads are found to be worn during inspection, check the corresponding camshaft lobes or adjusting shims, as they may also be worn. Replace any worn lifter pads.
Posted by NissanPartsDeal Specialist
Q:
What should you do if air becomes trapped inside the lifters for the 2000 Nissan Frontier? Posted by Customer
A:
If air is trapped, reinstall the rocker arm shaft assemblies and valve cover, and bleed the air from the lifters by running the engine at 1,000 rpm for about 10 minutes.
Posted by NissanPartsDeal Specialist
See expert answers on similar Camshaft
Q:
How should the camshaft bearing caps be removed for the 1998 Nissan Frontier? Posted by Customer
A:
Mark the camshaft bearing caps from 1 to 4, and with an "I" or an "E" to indicate intake or exhaust. Also, mark arrows indicating the front of the engine. Loosen the camshaft bearing caps in two or three steps, in the reverse order of the tightening sequence. Remove the bearing caps and the camshafts.
Posted by NissanPartsDeal Specialist
Q:
How do you complete the installation process for the 2002 Nissan Frontier? Posted by Customer
A:
Complete the installation by reversing the removal process.
Posted by NissanPartsDeal Specialist
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Nissan Part 13020-F4411, the Right Choice

To ensure reliability, purchase Nissan part # 13020-F4411 Camshaft Assy. It is sometimes referred to as Nissan Camshaft. OEM parts are the #1 choice in terms of quality. Crafted by Nissan, they follow rigorous factory specs and go through the demanding quality control processes during manufacturing. This part fits 1998-2001 Nissan Frontier, 2000-2001 Nissan Xterra.

NissanPartsDeal.com is a leading supplier of genuine Nissan parts and accessories such as Nissan 13020F4411 Camshaft Assy. Welcome to our vast selection of competitively-priced genuine Nissan parts available online. Each OEM Nissan part we provide is backed by a manufacturer's warranty and is subject to a stress-free return policy. Place your order now and receive your parts quickly, shipped directly to your doorstep.

Why choose Nissan Parts Deal

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly