Nissan 16119-7S00F Fuel Injection Throttle Body

You can Select Your Vehicle to check if 16119-7S00F fits your vehicle.

Once you remove the throttle body, replace the old gasket and reinstall, ensuring the proper torque specifications. For the idle air volume relearn procedure, meet specific conditions like battery voltage and engine temperature. Start the engine, warm it up, turn it off and wait 10 seconds before servicing it. Turn the ignition on, wait three seconds, then depress and release the accelerator pedal five times within five seconds. Start the engine, let it idle for 20 seconds, then check the idle speed and ignition timing.

1. Perform the accelerator pedal release position relearn procedure.2. Perform the throttle valve closed position relearn procedure.3. Start the engine and warm it up to normal operating temperature.4. Turn the ignition switch to OFF and wait for at least 10 seconds.5. Verify that the accelerator pedal is fully released.6. Turn the ignition switch to ON and wait three seconds.7. Repeat a specific procedure five times within five seconds, fully depressing and releasing the accelerator pedal.8. After a certain time, fully release the accelerator pedal and start the engine, allowing it to idle for 20 seconds.9. Rev up the engine and check the idle speed and ignition timing.