Nissan 92600-7B410 Compressor Assembly

You can Select Your Vehicle to check if 92600-7B410 fits your vehicle.

Follow these calculations to determine the proper amount of refrigerant oil to add to the new compressor: Drain the refrigerant oil from the old compressor through the suction fitting and measure it in ounces. Drain any new oil from the new compressor. If the amount of oil drained from the old compressor was between 3 to 5 ounces, add that same amount of clean, new oil to the new compressor. If the amount of oil drained from the old compressor was less than 3 ounces, add 3 ounces of clean, new oil to the new compressor. If the amount of oil drained from the old compressor was more than 5 ounces, add 5 ounces of clean, new oil to the new compressor.

The initial steps to begin replacing the air conditioning compressor are as follows: Have the air conditioning system refrigerant discharged and recycled by an air conditioning technician. Disconnect the cable from the negative terminal of the battery. Set the parking brake, block the rear wheels, and raise the front of the vehicle securely on jack stands. Remove the splash cover located below the engine.