Nissan 92600-4S100 Compressor-Cooler

You can Select Your Vehicle to check if 92600-4S100 fits your vehicle.

Follow these calculations to determine the proper amount of refrigerant oil to add to the new compressor: Drain the refrigerant oil from the old compressor through the suction fitting and measure it in ounces. Drain any new oil from the new compressor. If the amount of oil drained from the old compressor was between 3 to 5 ounces, add that same amount of clean, new oil to the new compressor. If the amount of oil drained from the old compressor was less than 3 ounces, add 3 ounces of clean, new oil to the new compressor. If the amount of oil drained from the old compressor was more than 5 ounces, add 5 ounces of clean, new oil to the new compressor.

After the new compressor is installed, follow these steps: Have the system evacuated to remove air and moisture. Recharge the system with the appropriate amount of refrigerant. Perform a leak test to ensure the system is properly sealed and free of leaks. It's recommended to have these tasks performed by an air conditioning technician to ensure proper execution.