Nissan 92610-0B010 Compressor

You can Select Your Vehicle to check if 92610-0B010 fits your vehicle.

1. Disconnect the negative battery cable from the battery. 2. Set the parking brake, block the rear wheels, and raise the front of the vehicle, supporting it securely on jackstands. 3. Remove the drivebelt. 4. Disconnect the compressor clutch wiring harness and the high pressure switch electrical connector at the rear of the compressor. 5. Disconnect the refrigerant lines from the compressor and plug the open fittings to prevent entry of dirt and moisture. 6. Unbolt the compressor from the mounting bracket and remove it from the vehicle. Note that the upper mounting bolts will not come all the way out of the compressor - leave them in the compressor until it is removed from the vehicle.