Nissan 13502-40F11 Cover-Front

You can Select Your Vehicle to check if 13502-40F11 fits your vehicle.

To replace the timing belt and crankshaft oil seal, ensure the No. 1 piston is at TDC on the compression stroke. Remove the timing belt by loosening or removing the timing belt tensioner. Remove the front oil seal, clean the mounting surface, and install a new oil seal, timing belt, and tensioner. Finally, reinstall the timing belt covers, start the engine, check the timing, and road test the vehicle.

To remove the front cover, you should remove the bolts holding the front cover to the front of the cylinder block, the bolts retaining the front of the oil pan to the bottom of the front cover, and the bolts screwed down through the front of the cylinder head into the top of the front cover. Carefully pry the front cover off the engine.