Nissan 44100-8Z400 Cylinder Assy-Rear Wheel

You can Select Your Vehicle to check if 44100-8Z400 fits your vehicle.

Raise the rear of the vehicle and support it securely on jackstands. Block the front wheels to keep the vehicle from rolling. Remove the brake shoe assembly. Remove all dirt and foreign material from around the wheel cylinder. Disconnect the brake line with a flare-nut wrench, if available. Don't pull the brake line away from the wheel cylinder. Remove the wheel cylinder mounting bolts. Detach the wheel cylinder from the brake backing plate and place it on a clean workbench. Immediately plug the brake line to prevent fluid loss and contamination. Place the wheel cylinder in position and install the bolts finger tight. Connect the brake line to the cylinder, being careful not to cross-thread the fitting. Tighten the wheel cylinder bolts to the torque listed. Tighten the brake line securely and install the brake shoes. Bleed the brakes. Check the operation of the brakes carefully before driving the vehicle.