Nissan 63100-JA030 Fender-Front,RH

You can Select Your Vehicle to check if 63100-JA030 fits your vehicle.

Remove the front bumper cover and the headlight housing. Take out the push-pin retainers from the body side lower molding, which is secured with clips and a screw at each end; this molding must be removed to access the fender bolts behind it. Next, remove the fenderwell liner, which is held in place by clips and screws, noting that there are lower fender bolts behind the lower body side molding. Proceed to remove the fender mounting bolts, including those concealed under the lower body side molding and several along the top edge in the engine compartment, and then take off the fender. Exercise caution as the fender is glued to the body with foam; take care when separating it to avoid bending. Installation follows the reverse order of removal.