Nissan 65100-7B030 Hood

You can Select Your Vehicle to check if 65100-7B030 fits your vehicle.

The hood is heavy and somewhat awkward to remove and install, so at least two people should perform this procedure. Begin by using blankets or pads to cover the cowl area of the body and fenders to protect the paint. Make marks or scribe a line around the hood hinge for proper alignment during installation. Disconnect any cables or wires that may interfere with removal. Have an assistant support one side of the hood while taking turns to remove the hinge-to-hood retaining bolts, then lift off the hood. For installation, reverse the removal steps. To adjust the hood, move the hinge plate slot after loosening the bolts or nuts for fore-and-aft and side-to-side adjustments. Scribe a line around the hinge plate to determine movement, then loosen the bolts or nuts and adjust the hood into the correct alignment, tightening the hinge bolts afterward to check the position. If necessary, adjust the entire hood latch assembly up and down as well as side to side on the radiator support to ensure the hood closes securely and flush with the fenders. Mark around the hood latch mounting bolts for reference, loosen them, reposition the latch assembly, and retighten the bolts before checking the fit. Finally, adjust the hood bumpers on the radiator support to ensure the hood is flush with the fenders when closed, and periodically lubricate the hood latch assembly and hinges with white, lithium-base grease to prevent binding and wear.