Nissan 43202-7Y000 Hub Assembly Rear

You can Select Your Vehicle to check if 43202-7Y000 fits your vehicle.

Loosen the rear wheel lug nuts, raise the rear of the vehicle, support it securely on jack stands, and remove the wheels. For 2003 and earlier models, remove the brake drum or disc, then take off the grease cap using a hammer and chisel. If applicable, remove the cotter pin, followed by the wheel bearing lock nut and washer. Next, take out the hub and bearing assembly from the spindle. Before installing the hub and bearing assembly, clean the spindle and apply a coat of wheel bearing grease to the area where the bearing rides. Installation is the reverse of removal; tighten the hub nut to the specified torque, install a new cotter pin if applicable, and stake the new hub nut against the spindle on two sides for other models. Finally, tighten the caliper mounting bolts to the specified torque. For 2004 and later models, begin by removing the hub and bearing assembly mounting bolts, then take out the hub and bearing assembly. Install the wheel and lug nuts, lower the vehicle, and tighten the lug nuts to the specified torque.

The job requires special tools and expertise that a professional mechanic possesses.