Nissan 11220-40U11 Engine Mounting Insulator Assembly, Front Left

You can Select Your Vehicle to check if 11220-40U11 fits your vehicle.

To replace the mounts, disconnect the cable from the negative battery terminal, set the parking brake, block the rear wheels, raise the front of the vehicle, and support it securely on jackstands while removing the splash shields. Support the engine from above, then remove the through-bolts from the right-front and right-rear mounts, detach the crossmember from the vehicle, and remove the mount-to-engine bracket through-bolts. Installation is the reverse of removal, ensuring bolts are tightened to specifications only after the engine weight is back on the mounts and the jack is removed.

There are four powertrain mounts: front and rear mounts at the center of the vehicle connected to the engine block and lower crossmember, a right side mount attached to the front of the timing cover and frame, and a left side mount connected to the transaxle and frame.