Nissan 11220-8J100 Engine Mounting Insulator Assembly,Front Left

You can Select Your Vehicle to check if 11220-8J100 fits your vehicle.

Inspect the mounts for cracked, hardened rubber or separation from the bushing, and check for relative movement between the mounts and the engine or frame using a large screwdriver or prybar. If movement is noted, lower the engine and tighten the mount fasteners.

For replacement, disconnect the cable from the negative battery terminal, set the parking brake, block the rear wheels, raise the front of the vehicle, and support it securely on jackstands. Remove the splash shields and, if applicable, disconnect the wiring harness for the electronically controlled engine mount. Position a floor jack under the transaxle case with a wood block in between, then remove the through-bolts from the front and rear mounts, detach the crossmember from the vehicle, and remove the mount-to-engine bracket through-bolts.