Nissan 11320-8Y00A Engine Mounting Insulator ,Rear

You can Select Your Vehicle to check if 11320-8Y00A fits your vehicle.

The left-rear mount requires removing nuts at the mount bracket from below and the through-bolt at the chassis bracket from above, followed by lowering the transaxle to clear the bracket and removing the mount.

Installation follows the reverse order of removal, ensuring bolts are tightened to specifications only after the engine weight is back on the mounts. For the right side engine mount, support the engine from above, remove the upper engine mount bracket and through-bolt, raise the engine slightly, and remove the mount. The left side transaxle mount requires positioning a floor jack under the transaxle housing, removing the air cleaner housing and intake duct, and then removing the transaxle-to-mount bolts.