Nissan 11320-85E11 Engine Mounting Insulator ,Rear

You can Select Your Vehicle to check if 11320-85E11 fits your vehicle.

For replacement, disconnect the cable from the negative battery terminal, set the parking brake, block the rear wheels, raise the front of the vehicle, and support it securely on jackstands. Remove the splash shields and, if applicable, disconnect the wiring harness for the electronically controlled engine mount. Position a floor jack under the transaxle case with a wood block in between, then remove the through-bolts from the front and rear mounts, detach the crossmember from the vehicle, and remove the mount-to-engine bracket through-bolts.

For the left-front mount, support the transaxle with a jack, remove the through-bolt at the chassis, and the bolts holding the mount to the transaxle before removing the mount.