Nissan 40160-0B000 Joint Assembly-Ball,Lower

You can Select Your Vehicle to check if 40160-0B000 fits your vehicle.

Loosen the wheel lug nuts, raise the vehicle, and support it securely on jackstands before removing the wheel. Separate the balljoint from the steering knuckle, then remove the three control arm-to-balljoint nuts to detach the balljoint from the control arm. After removing the balljoint from the control arm, installation is the reverse of removal. Ensure all fasteners are tightened to the specified torque and install a new cotter pin through the balljoint stud. Finally, install the wheel and lug nuts, lower the vehicle, and tighten the lug nuts to the specified torque.