Nissan 54524-7S000 Link Complete-Front Suspension,Upper RH

You can Select Your Vehicle to check if 54524-7S000 fits your vehicle.

Start by loosening the wheel lug nuts and raising the front of the vehicle on jackstands. Then, remove the wheel and the fenderwell liner. Disconnect the upper control arm from the steering knuckle by removing the cotter pin, loosening the upper balljoint nut, and using a balljoint separator to break the balljoint loose from the knuckle. Remove the nut. Secure the steering knuckle with wire to prevent damage. Finally, remove the upper control arm pivot bolts and nuts, noting their orientation.

Loosen the wheel lug nuts, raise the vehicle, and support it securely on jackstands placed under the frame rails.

Turn the ignition key to the OFF position.

Position it in the frame brackets and install the bolts and nuts without tightening them yet. Attach the balljoint to the steering knuckle and tighten the ballstud nut, then install a new cotter pin. Tighten the control arm pivot bolts/nuts.