Nissan 14001-7S005 Manifold Assy-Intake

You can Select Your Vehicle to check if 14001-7S005 fits your vehicle.

Clean the mounting surfaces of the intake manifold and the ports on the cylinder heads with lacquer thinner, removing all traces of old gasket material or sealant. Install new gaskets on the intake manifold, ensuring there are eight individual gaskets for the manifold, one for each intake port. Then, following the recommended tightening sequence, tighten the fasteners in several steps to the specified torque.

Loosen the intake manifold fasteners in the reverse order of the tightening sequence, then remove the bolts and the manifold, which are accessible after the fuel rails and injectors are removed.