Contact Us: Live Chat or 1-888-726-6993
×
Search Bar
Search by Part Number, Part Name, Description
My Garage
My Account
My Cart
Make sure this part fits your vehicle

Nissan A2010-2Z062 Piston W/PIN

2000-2003 Nissan A20102Z062

Nissan A2010-2Z062 Piston W/PIN
Nissan A2010-2Z062 Piston W/PIN
  • Part Description
    Piston-W/Pin
  • Lookup Code
    12010
  • Replaced By
    A2010-5S662
  • Manufacturer
    Nissan
  • Manufacturer's Notes
    This part is discontinued.
Customer Questions & Answers

A2010-2Z062 Piston W/PIN is Lookup Code 12010 in the diagram below

2000 Nissan Xterra Piston W/PIN Diagram for A2010-2Z062
The diagram listed above is for your reference. View diagram for your vehicle

Related Parts

  • Product Specifications

    BrandGenuine Nissan
    Lookup Code12010
    Manufacturer Part NumberA2010-2Z062
    Part DescriptionPiston-W/Pin
    Item Dimensions3.8 x 3.7 x 3.3 inches
    Item Weight1.60 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity3
    ManufacturerNissan
    SKUA2010-2Z062
    WarrantyThis genuine Nissan part is guaranteed by Nissan's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65

  • Vehicle Fitment

    Year Make Model Trim & Engine Important vehicle option details
    2000-2002 Nissan FrontierSE, XE|6 Cyl 3.3LVG33E
    2000-2003 Nissan QuestGXE, SE|6 Cyl 3.3LVG33E
    2000-2002 Nissan XterraSE, XE|6 Cyl 3.3LVG33E

Customer Questions & Answers

Q:
Does this part fit my vehicle? Posted by NissanPartsDeal Specialist
A:
You can Select Your Vehicle to check if A2010-2Z062 fits your vehicle.
Posted by NissanPartsDeal Specialist
Q:
What is the procedure for tightening the nuts on the connecting rod for the 1997 Nissan Quest? Posted by Customer
A:
Tighten the nuts to the specified torque in three steps, then remove the rod cap to measure the crushed Plastigage against the scale for clearance verification.
Posted by NissanPartsDeal Specialist
Q:
What is the process for removing the connecting rod/piston assembly for the 1995 Nissan Quest? Posted by Customer
A:
Remove the bearing insert and push the connecting rod/piston assembly out through the top of the engine, using a wooden hammer handle to apply pressure on the upper bearing surface. If resistance is encountered, ensure all ridge material has been removed from the cylinder.
Posted by NissanPartsDeal Specialist
See expert answers on similar Piston
Q:
How is piston ring side clearance measured for the 1993 Nissan Quest? Posted by Customer
A:
The piston ring side clearance is measured using a feeler gauge at several points around each groove, ensuring the correct ring is used for each groove.
Posted by NissanPartsDeal Specialist
Q:
What should be inspected on each piston during the inspection process for the 2003 Nissan Xterra? Posted by Customer
A:
Each piston should be inspected for cracks around the skirt, pin bosses, and ring lands, along with checks for scoring, scuffing, holes in the piston crown, and burned areas at the crown's edge.
Posted by NissanPartsDeal Specialist
Q:
What should be checked before removing the connecting rods for the 2004 Nissan Xterra? Posted by Customer
A:
The side clearance (endplay) should be checked using feeler gauges.
Posted by NissanPartsDeal Specialist
See expert answers on similar Piston
Q:
What should be applied to the bearing faces before reinstalling the rod cap for the 2002 Nissan Frontier? Posted by Customer
A:
Before reinstalling the rod cap, a clean moly-base grease or engine assembly lube should be applied to the bearing faces.
Posted by NissanPartsDeal Specialist
See expert answers on similar Piston
Q:
What should be done after removing the piston/connecting rod assemblies for the 1999 Nissan Frontier? Posted by Customer
A:
Reassemble the connecting rod caps and bearing inserts in their respective connecting rods and install the cap nuts finger tight.
Posted by NissanPartsDeal Specialist
Q:
Why is it vital to measure piston ring side clearance and piston-to-bore clearance for the 2000 Nissan Frontier? Posted by Customer
A:
Measuring piston ring side clearance and piston-to-bore clearance is vital to ensure that the piston rings and pistons fit correctly within the cylinder bore, preventing excessive wear and oil consumption.
Posted by NissanPartsDeal Specialist
Q:
What should be done during the connecting rod bearing oil clearance check for the 2001 Nissan Xterra? Posted by Customer
A:
During the connecting rod bearing oil clearance check, Plastigage is placed on the connecting rod journal, and the rod cap is installed without disturbing the Plastigage. The nuts are then tightened to specified torque without rotating the crankshaft.
Posted by NissanPartsDeal Specialist
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Nissan Part A2010-2Z062, the Right Choice

To ensure reliability, purchase Nissan part # A2010-2Z062 Piston W/PIN. It is sometimes referred to as Nissan Piston. OEM parts are the #1 choice in terms of quality. Crafted by Nissan, they follow rigorous factory specs and go through the demanding quality control processes during manufacturing. This part fits 2000-2002 Nissan Frontier, 2000-2003 Nissan Quest, 2000-2002 Nissan Xterra.

NissanPartsDeal.com is a leading supplier of genuine Nissan parts and accessories such as Nissan A20102Z062 Piston W/PIN. Welcome to our vast selection of competitively-priced genuine Nissan parts available online. Each OEM Nissan part we provide is backed by a manufacturer's warranty and is subject to a stress-free return policy. Place your order now and receive your parts quickly, shipped directly to your doorstep.

Why choose Nissan Parts Deal

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly