Contact Us: Live Chat or 1-888-726-6993
×
Search Bar
Search by Part Number, Part Name, Description
My Garage
My Account
My Cart
Make sure this part fits your vehicle

Nissan A2010-7B064 Piston W/PIN

1998-2001 Nissan A20107B064

Nissan A2010-7B064 Piston W/PIN
Nissan A2010-7B064 Piston W/PIN
  • Part Description
    Piston-W/Pin
  • Lookup Code
    12010
  • Replaced By
    A2010-5S664
  • Manufacturer
    Nissan
  • Manufacturer's Notes
    This part is discontinued.
Customer Questions & Answers

A2010-7B064 Piston W/PIN is Lookup Code 12010 in the diagram below

2000 Nissan Xterra Piston W/PIN Diagram for A2010-7B064
The diagram listed above is for your reference. View diagram for your vehicle

Related Parts

  • Product Specifications

    BrandGenuine Nissan
    Lookup Code12010
    Manufacturer Part NumberA2010-7B064
    Part DescriptionPiston-W/Pin
    Manufacturer NoteSTD GRADE 4
    Item Dimensions3.9 x 3.6 x 3.3 inches
    Item Weight1.60 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerNissan
    SKUA2010-7B064
    WarrantyThis genuine Nissan part is guaranteed by Nissan's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65

  • Vehicle Fitment

    Year Make Model Trim & Engine Important vehicle option details
    1998-2001 Nissan FrontierSE, XE|6 Cyl 3.3LVG33E
    1999-2001 Nissan QuestGXE, SE|6 Cyl 3.3LVG33E
    2000-2001 Nissan XterraSE, XE|6 Cyl 3.3LVG33E

Customer Questions & Answers

Q:
Does this part fit my vehicle? Posted by NissanPartsDeal Specialist
A:
You can Select Your Vehicle to check if A2010-7B064 fits your vehicle.
Posted by NissanPartsDeal Specialist
Q:
What should be checked before removing the connecting rods for the 1993 Nissan Quest? Posted by Customer
A:
Check the side clearance with feeler gauges, ensuring the play is removed. If the side clearance exceeds the service limit, new connecting rods may be necessary.
Posted by NissanPartsDeal Specialist
See expert answers on similar Piston
Q:
What should be done after all assemblies are installed for the 1998 Nissan Quest? Posted by Customer
A:
After all assemblies are installed, rotate the crankshaft to check for binding, and finally, check the connecting rod endplay, comparing it to specifications to determine if resizing or new rods are necessary.
Posted by NissanPartsDeal Specialist
Q:
How is piston-to-rod clearance assessed for the 1998 Nissan Quest? Posted by Customer
A:
Piston-to-rod clearance is assessed by twisting the piston and rod in opposite directions; noticeable play indicates excessive wear that requires correction.
Posted by NissanPartsDeal Specialist
Q:
How should the connecting rod cap nuts be loosened for the 2001 Nissan Xterra? Posted by Customer
A:
Loosen each of the connecting rod cap nuts 1/2-turn at a time until they can be removed by hand.
Posted by NissanPartsDeal Specialist
See expert answers on similar Piston
Q:
When are new pistons not required during engine rebuilding for the 2001 Nissan Xterra? Posted by Customer
A:
New pistons are not required during engine rebuilding as long as the pistons and cylinder walls show no significant damage or wear, and the engine block isn't rebored. However, new piston rings must always be used.
Posted by NissanPartsDeal Specialist
Q:
What should be done before installing the piston/connecting rod assemblies for the 2003 Nissan Xterra? Posted by Customer
A:
Before installing the piston/connecting rod assemblies, you should ensure that the cylinder walls are meticulously clean, the top edges of each cylinder are chamfered, and the crankshaft is in position.
Posted by NissanPartsDeal Specialist
Q:
How should the connecting rod cap nuts be loosened for the 2001 Nissan Frontier? Posted by Customer
A:
Loosen each of the connecting rod cap nuts 1/2-turn at a time until they can be removed by hand.
Posted by NissanPartsDeal Specialist
Q:
What should be inspected on each piston during the inspection process for the 2001 Nissan Frontier? Posted by Customer
A:
Each piston should be inspected for cracks around the skirt, pin bosses, and ring lands, along with checks for scoring, scuffing, holes in the piston crown, and burned areas at the crown's edge.
Posted by NissanPartsDeal Specialist
Q:
What should be applied to the bearing faces before reinstalling the rod cap for the 2003 Nissan Frontier? Posted by Customer
A:
Before reinstalling the rod cap, a clean moly-base grease or engine assembly lube should be applied to the bearing faces.
Posted by NissanPartsDeal Specialist
See expert answers on similar Piston
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Nissan Part A2010-7B064, the Right Choice

To ensure reliability, purchase Nissan part # A2010-7B064 Piston W/PIN. It is sometimes referred to as Nissan Piston. OEM parts are the #1 choice in terms of quality. Crafted by Nissan, they follow rigorous factory specs and go through the demanding quality control processes during manufacturing. This part fits 1998-2001 Nissan Frontier, 1999-2001 Nissan Quest, 2000-2001 Nissan Xterra.

NissanPartsDeal.com is a leading supplier of genuine Nissan parts and accessories such as Nissan A20107B064 Piston W/PIN. Welcome to our vast selection of competitively-priced genuine Nissan parts available online. Each OEM Nissan part we provide is backed by a manufacturer's warranty and is subject to a stress-free return policy. Place your order now and receive your parts quickly, shipped directly to your doorstep.

Why choose Nissan Parts Deal

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly