Nissan C9G41-1AA0A Repair Kit-Dust B00T,Inner

You can Select Your Vehicle to check if C9G41-1AA0A fits your vehicle.

For the rear outer CV joint, remove the driveaxle, clamp it in a vise, and remove the boot clamp before using a slide hammer to pull the CV joint off. Clean the old grease, wrap the splines with tape, and slide on a new boot, then place a new retaining ring and drive the CV joint onto the axle. Apply new grease, seat the boot, adjust its length, equalize the air pressure, and install the boot clamps before finally installing the driveaxle assembly.

The boots should be inspected for any tears, cracks, or loose clamps, and for signs of leaking grease.