Nissan C9B41-JA02A Repair Kt Outer RH

You can Select Your Vehicle to check if C9B41-JA02A fits your vehicle.

Slide the smaller gaiter securing clip onto the driveshaft, followed by the gaiter. Fit a new joint retaining circlip on the shaft. Apply half of the supplied grease into the outer joint, align it with the shaft splines, and tap it onto the shaft until the circlip engages correctly. Pack the joint with the remaining grease, ensuring all recesses are filled. Check that the gaiter is properly positioned, slide it onto the outer joint, and secure it with retaining clips.