Nissan 54618-7S000 Rod Assy-Connecting,Stabilizer

You can Select Your Vehicle to check if 54618-7S000 fits your vehicle.

On Armada models that have rear auto-leveling suspensions, the ignition key must be turned off before raising it. The loosening of rear wheel lug nuts and raising the vehicle at the back on jackstands should be done initially. For preventing rolling off the stands block front wheels and remove rear wheels. After that, remove nuts from upper ends of sway bar links to separate links from the Sway Bar Kit. Take out sway bar clamp bolts then take away sway bar. Carrying out an inspection on cracks, tears or any other signs of deteriorations in the sway bar bushings is vital; replace them if need arises. Similarly, find out if the ball-studs on the ends of the links are loose and substitute the links as required. To ensure that all fasteners are tightened, installation should be carried out in reverse order of removal.

On Armada models equipped with a rear auto-leveling suspension, turn the ignition key to the OFF position before raising the vehicle. Raise the vehicle and support it securely on jackstands. Remove the engine splash shield as necessary. Remove the nuts from the sway bar link and detach the links from the Sway Bar Kit (Front sway bar link nuts). Be sure to keep the parts for the left and right sides separate. Remove the sway bar bracket bolts (Front sway bar bracket bolts). Remove the sway bar. Remove the Sway Bar Bushing. Inspect all parts for wear and damage, replacing them as necessary. Installation is the reverse of removal. Be sure to tighten all fasteners.

The stabilizer bar bracket bolts.

Loosen the rear wheel lug nuts.