Contact Us: Live Chat or 1-888-726-6993
My Garage
My Account
My Cart
Make sure this part fits your vehicle

Nissan 31375-51X03 Seal

1987-2004 Nissan 3137551X03

Nissan 31375-51X03 Seal
  • Part Description
    Seal-Oil Pump Housing
  • Lookup Code
    31344
  • Replaces
    31375-51X00, 31344-41X00
  • Manufacturer
    Nissan
Customer Questions & Answers
$13.16 MSRP: $18.58
You Save: $5.42 (30%)
1
ADD TO CART
Ships in 1-2 Business Days
  • Product Specifications

    BrandGenuine Nissan
    Lookup Code31344
    Manufacturer Part Number31375-51X03
    Part DescriptionSeal-Oil Pump Housing
    Item Dimensions2.5 x 2.6 x 0.4 inches
    Item Weight0.20 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces31375-51X00, 31344-41X00
    ManufacturerNissan
    SKU31375-51X03
    WarrantyThis genuine Nissan part is guaranteed by Nissan's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Trim & Engine Important vehicle option details
    1995-1998 Nissan 240SXSE, STD|4 Cyl 2.4LKA24DE
    1994-1996 Nissan 300ZXGL, GLL|6 Cyl 3.0LVD30DTT, VG30D, VG30DTT
    1998-2004 Nissan FrontierSC, SE, XE|4 Cyl 2.4L, 6 Cyl 3.3LKA24DE, VG33E
    1987-1994 Nissan Hardbody Pickup (D21)DX, GST, ST|6 Cyl 3.0LVG30, VG30E
    1995-1997 Nissan Hardbody Pickup (D21U)Long Body SE, Long Body XE, SE, Short Body XE, XE|4 Cyl 2.4L, 6 Cyl 3.0LKA24E, VG30E
    1987-2004 Nissan PathfinderLE, SE, ST, XE|6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.5LVG30E, VG30I, VG33E, VQ35DE
    2000-2004 Nissan XterraSE, XE|6 Cyl 3.3LVG33E, VG33ER

Customer Questions & Answers

Q:
I want to make sure this part fits my car Posted by NissanPartsDeal Specialist
A:
You can Select Your Vehicle to check if 31375-51X03 fits your vehicle.
Posted by NissanPartsDeal Specialist
Q:
What steps are involved in replacing the shift shaft oil seal for the 2003 Nissan Pathfinder? Posted by Customer
A:
Mark the relationship of the lever to the shift shaft, detach the linkage from the lever, then loosen the pinch bolt and slide the lever off the shaft. Carefully pry the seal out of the case. Lubricate the new seal with multi-purpose grease and install it over the shaft, tapping it into place with an appropriately sized deep socket. Install the lever onto the shaft and tighten the pinch bolt securely. Reconnect the linkage to the lever, install the bolt and tighten it securely. Finally, check the lubricant level and add the recommended type of lubricant to reach the bottom of the filler hole if necessary.
Posted by NissanPartsDeal Specialist
See expert answers on similar Transfer Case Seal
Q:
How do you proceed after removing the old seal for the 2000 Nissan Pathfinder? Posted by Customer
A:
Use a seal driver, a large section of pipe, or a very large deep socket as a drift to install the new oil seal into the extension housing.
Posted by NissanPartsDeal Specialist
See expert answers on similar Transfer Case Seal
Q:
How do you prepare to replace the front output shaft seal for the 2001 Nissan Xterra? Posted by Customer
A:
Raise the vehicle and support it securely on jackstands. A flange holding tool or chain wrench will be required to keep the companion flange from moving while the nut is loosened.
Posted by NissanPartsDeal Specialist
See expert answers on similar Transfer Case Seal
Q:
How do you proceed after removing the old seal for the 2000 Nissan Xterra? Posted by Customer
A:
Use a seal driver, a large section of pipe, or a very large deep socket as a drift to install the new oil seal into the extension housing.
Posted by NissanPartsDeal Specialist
Q:
What is a common cause of oil leaks in the transmission for the 2004 Nissan Frontier? Posted by Customer
A:
Oil leaks are often caused by wear of the extension housing oil seal, located at the extreme rear of the transmission.
Posted by NissanPartsDeal Specialist
Q:
What steps are involved in replacing the shift shaft oil seal for the 2004 Nissan Frontier? Posted by Customer
A:
Mark the relationship of the lever to the shift shaft, detach the linkage from the lever, then loosen the pinch bolt and slide the lever off the shaft. Carefully pry the seal out of the case. Lubricate the new seal with multi-purpose grease and install it over the shaft, tapping it into place with an appropriately sized deep socket. Install the lever onto the shaft and tighten the pinch bolt securely. Reconnect the linkage to the lever, install the bolt and tighten it securely. Finally, check the lubricant level and add the recommended type of lubricant to reach the bottom of the filler hole if necessary.
Posted by NissanPartsDeal Specialist
See expert answers on similar Transfer Case Seal
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Nissan Part 31375-51X03, the Right Choice

To ensure reliability, purchase Nissan part # 31375-51X03 Seal. It is sometimes referred to as Nissan Transfer Case Seal. OEM parts are the #1 choice in terms of quality. Crafted by Nissan, they follow rigorous factory specs and go through the demanding quality control processes during manufacturing. This part fits 1995-1998 Nissan 240SX, 1994-1996 Nissan 300ZX, 1998-2004 Nissan Frontier, 1987-2004 Nissan Pathfinder.

NissanPartsDeal.com is a leading supplier of genuine Nissan parts and accessories such as Nissan 3137551X03 Seal. Welcome to our vast selection of competitively-priced genuine Nissan parts available online. Each OEM Nissan part we provide is backed by a manufacturer's warranty and is subject to a stress-free return policy. Place your order now and receive your parts quickly, shipped directly to your doorstep.

Why choose Nissan Parts Deal

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly