Nissan 25060-7S00A Fuel Tank Sending Unit

You can Select Your Vehicle to check if 25060-7S00A fits your vehicle.

On Titan models, there is no fuel pump inspection hole, so the fuel tank must be removed. The fuel pump module can be removed by disconnecting the fuel pump electrical connector and lines, marking the position of the module in relation to the fuel tank, and unscrewing the pump module lock ring. Carefully pull the fuel pump module out of the tank, angling it as necessary to protect the fuel level sensor float arm.

To access the fuel pump inspection hole cover on Armada models, you need to remove several components, including seats, trim panels, and the carpeting. Once these components are removed, you can rotate the retainers on the inspection hole cover 1/4-turn clockwise and then pull off the cover.