Contact Us: Live Chat or 1-888-726-6993
My Garage
My Account
My Cart
Make sure this part fits your vehicle

Nissan 39204-2S670 Shaft-Front Drive,R

2000-2003 Nissan 392042S670

Nissan 39204-2S670 Shaft-Front Drive,R
  • Part Description
    Shaft Sub Assy-Front Drive
  • Lookup Code
    39202
  • Position
    Front Passenger Side
  • Replaced By
    39204-2S680
  • Manufacturer
    Nissan
  • Manufacturer's Notes
    This part is discontinued.
Customer Questions & Answers
  • Product Specifications

    BrandGenuine Nissan
    Lookup Code39202
    Manufacturer Part Number39204-2S670
    Part DescriptionShaft Sub Assy-Front Drive
    Item Dimensions16.1 x 2.0 x 1.5 inches
    Item Weight4.40 Pounds
    PositionFront Passenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity2
    ManufacturerNissan
    SKU39204-2S670
    WarrantyThis genuine Nissan part is guaranteed by Nissan's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Trim & Engine Important vehicle option details
    2000-2003 Nissan FrontierSC, SE, XE|6 Cyl 3.3LVG33E
    2000-2003 Nissan XterraSE, XE|6 Cyl 3.3LVG33E, VG33ER

Customer Questions & Answers

Q:
I want to make sure this part fits my car Posted by NissanPartsDeal Specialist
A:
You can Select Your Vehicle to check if 39204-2S670 fits your vehicle.
Posted by NissanPartsDeal Specialist
Q:
How do you begin the process of removing the differential for the 2003 Nissan Xterra? Posted by Customer
A:
Start by raising the vehicle and securely supporting it on jackstands.
Posted by NissanPartsDeal Specialist
Q:
What is the recommended action if a drive axle boot is damaged for the 2003 Nissan Xterra? Posted by Customer
A:
If a drive axle boot is damaged, the CV joint can be disassembled and cleaned. However, if any parts of the CV joint are found to be damaged, the entire drive axle assembly must be replaced as a complete unit.
Posted by NissanPartsDeal Specialist
Q:
How do you extract the axle from the housing for the 2000 Nissan Xterra? Posted by Customer
A:
To remove the axle, start by removing the nuts that secure the axle retaining plate to the axle housing. Attach a slide hammer and an adapter to the axle flange and use the slide hammer to pull the axle from the housing.
Posted by NissanPartsDeal Specialist
Q:
Is it recommended for a do-it-yourselfer to perform an overhaul of the differential for the 2003 Nissan Xterra? Posted by Customer
A:
Overhauling the differential is not typically a cost-effective endeavor for a do-it-yourselfer. Instead, any further work involving the differential should be entrusted to a qualified repair shop with the appropriate expertise and equipment.
Posted by NissanPartsDeal Specialist
Q:
What actions should be taken to separate the drive axle from the axleshaft flange for the 2003 Nissan Xterra? Posted by Customer
A:
To separate the drive axle from the axleshaft flange, you need to connect a floor jack under the outer end of the lower control arm and raise it slightly. This helps with maneuvering the drive axle. Then, disconnect the tie-rod end from the steering knuckle.
Posted by NissanPartsDeal Specialist
Q:
What components need to be disconnected or removed before working on the rear axle for the 2002 Nissan Frontier? Posted by Customer
A:
After raising and securing the vehicle, remove the rear wheels. Position a jack under the rear axle differential housing. Proceed to disconnect the driveshaft from the rear axle pinion flange. Disconnect the shock absorbers at their lower mounts. Also, disconnect the vent hose from the fitting on the axle housing and secure it out of the way. Unbolt the brake line fittings from the brake hose junction block, and then remove the brake hose junction block from the axle housing, plugging the hose to prevent fluid leakage. Don't forget to disconnect the ABS wheel speed sensor electrical connector(s).
Posted by NissanPartsDeal Specialist
See expert answers on similar Axle Shaft
Q:
How should the boots on the drive axles be maintained for the 2000 Nissan Frontier? Posted by Customer
A:
It's important to inspect the boots on the drive axles periodically for any damage or signs of leaking lubricant. If either boot on a drive axle is damaged, that drive axle needs to be removed in order to replace the boot.
Posted by NissanPartsDeal Specialist
Q:
How do you complete the removal of the rear axle assembly from under the 2002 Nissan Xterra? Posted by Customer
A:
After disconnecting and removing necessary components, lower the jack positioned under the differential, and then proceed to remove the rear axle assembly from underneath the vehicle.
Posted by NissanPartsDeal Specialist
See expert answers on similar Axle Shaft
Q:
How should you handle the driveshaft during this process for the 2000 Nissan Frontier? Posted by Customer
A:
Before removing the driveshaft, mark the relationship of the driveshaft to the differential companion flange. Then, unbolt the driveshaft from the flange and support it with a piece of wire from the underbody.
Posted by NissanPartsDeal Specialist
Q:
What actions should be taken to separate the drive axle from the axleshaft flange for the 2003 Nissan Frontier? Posted by Customer
A:
To separate the drive axle from the axleshaft flange, you need to connect a floor jack under the outer end of the lower control arm and raise it slightly. This helps with maneuvering the drive axle. Then, disconnect the tie-rod end from the steering knuckle.
Posted by NissanPartsDeal Specialist
Q:
What should you do before guiding the axleshaft back into the axle housing for the 2000 Nissan Frontier? Posted by Customer
A:
Prior to guiding the axleshaft back into the axle housing, apply a thin coat of grease to the outer surface of the bearing. If you're working on a four-cylinder, 2WD Frontier, or Xterra model, make sure to install any shims that were present during removal.
Posted by NissanPartsDeal Specialist
Q:
What's a common misconception when diagnosing issues related to the axle for the 2003 Nissan Frontier? Posted by Customer
A:
Often, problems suspected to be related to the axle may actually stem from other causes. Therefore, it's crucial to perform a comprehensive examination of potential contributing factors before assuming that the axle is the root of the issue.
Posted by NissanPartsDeal Specialist
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Nissan Part 39204-2S670, the Right Choice

To ensure reliability, purchase Nissan part # 39204-2S670 Shaft-Front Drive,R. It is sometimes referred to as Nissan Axle Shaft. OEM parts are the #1 choice in terms of quality. Crafted by Nissan, they follow rigorous factory specs and go through the demanding quality control processes during manufacturing. This part fits 2000-2003 Nissan Frontier, 2000-2003 Nissan Xterra.

NissanPartsDeal.com is a leading supplier of genuine Nissan parts and accessories such as Nissan 392042S670 Shaft-Front Drive,R. Welcome to our vast selection of competitively-priced genuine Nissan parts available online. Each OEM Nissan part we provide is backed by a manufacturer's warranty and is subject to a stress-free return policy. Place your order now and receive your parts quickly, shipped directly to your doorstep.

Why choose Nissan Parts Deal

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly