Nissan 28156-JM00A Door Speaker

You can Select Your Vehicle to check if 28156-JM00A fits your vehicle.

Firstly, the cable should be unbolted from the negative terminal of the car battery but a person has to be careful when doing so as the battery part may be live. Next, there is a smaller trim that is located beneath the radio, which has to be taken off; the trim panels at the sides of the radio should also be taken off. Remove the radio mounting screws; this would allow you to take out the radio, as well as detach the electrical connectors. If needed unscrew the radio bracket screws and the brackets from the car. For removal, reverse the above procedures with the battery connection made together with the relevant re-learn procedures. Regarding the radio and A/C display, one has to uninstall the center vent unit, subsequently, to extract the mounting screws from the display bracket and disassemble the display. The radio display can be also removed from the bracket if necessary and installation is done in reverse manner. For the instrument panel speakers, repeat the same procedure by pulling out the cable from the negative terminal of the battery then, if the end speakers are to be removed, the windshield pillar trim panels should also be taken out. You have to lift the grilles very gently, unscrew the mount of the speakers, disconnect the speaker and then take the speakers out. Reinstallation is done in the reverse order, together with the final connection of the battery and other required re-learn operations. For door speakers, first you have to remove the doors panels, second to remove the nuts and screws to hold the speakers, third, you have turn off the electrical connection and finally remove the speakers for your car and to put the new ones, you just follow the opposite procedure.

For door speakers, remove the door trim panels, take out the mounting screws, disconnect the electrical connector, and remove the speaker. Then, reverse the steps for installation.