Nissan 54010-9TA1C Spring Front RH

You can Select Your Vehicle to check if 54010-9TA1C fits your vehicle.

Support the strut and spring assembly with one hand while removing the three upper mounting bolts, then take the assembly out of the fenderwell.

If there is difficulty aligning the upper and lower control arm bolt holes with the holes in the trailing arm, a come-along can be used to connect the trailing arm on both sides, allowing for adjustment and alignment with a long drift punch for bolt insertion.

Remove the piston rod nut using an Allen wrench, then take off the upper suspension support and inspect the bearing for smooth operation, replacing it if necessary. Check the rubber portion of the suspension support for deterioration and replace it if there is any separation. Lift the spring seat and upper insulator from the piston rod, checking the rubber spring seat for damage and replacing it if needed.