Nissan 11215-2J201 Stopper-Rubber, Engine Mounting

You can Select Your Vehicle to check if 11215-2J201 fits your vehicle.

Installation follows the reverse order of removal, ensuring bolts are tightened to specifications only after the engine weight is back on the mounts. For the right side engine mount, support the engine from above, remove the upper engine mount bracket and through-bolt, raise the engine slightly, and remove the mount. The left side transaxle mount requires positioning a floor jack under the transaxle housing, removing the air cleaner housing and intake duct, and then removing the transaxle-to-mount bolts.

If multiple mounts have been replaced or during engine installation, tighten the mounts in the specified order.