Nissan 54302-0B088 STRUT Kit Front RH

You can Select Your Vehicle to check if 54302-0B088 fits your vehicle.

Once the studs protrude from the strut tower, install the nuts to prevent the strut from falling back through, which is easier with assistance due to the strut's weight and awkwardness.

The first step in the installation process is to position the shock absorber onto its mounts.

During the visual inspection, look for signs of damage, distortion, torn seals, boot damage, and leaks in the steering and suspension components. Ensure that all parts are securely mounted and undamaged. If any components are found to be damaged or worn, they should be replaced.

If replacing the lower insulator, set it into position with the dropped portion seated in the lowest part of the seat, extend the damper rod fully, and install the dust boot. Place the compressed coil spring onto the lower insulator, ensuring the end rests in the lowest part of the insulator. Install the upper insulator and spring seat, ensuring the cutout on the spring seat faces out, in line with the strut-to-knuckle flange opening. Install the bearing onto the spring seat, followed by the dust seal and suspension support to the damper shaft. Finally, install and tighten the nut to the specified torque, carefully release the tension on the spring, and remove the spring compressor before installing the strut coil spring assembly.