Nissan 18201-1S700 Wire Assy-Accelerator

You can Select Your Vehicle to check if 18201-1S700 fits your vehicle.

After detaching the cable casing from the bracket, the next steps involve draining the transmission fluid, removing the fluid pan, and detaching the TV cable from its lever. Remove the bolt and detach the cable from the transmission. Finally, detach the cable adjuster from its bracket and remove the cable.

To detach the accelerator cable and cruise control cable (if present) from the throttle lever, follow these steps: Loosen Cable Locknut and Adjusting Nut: Begin by loosening the locknut and adjusting nut on the cable. Separate Accelerator Cable from Bracket: Separate the accelerator cable from the cable bracket. Remove Cable End from Accelerator Pedal Arm: Pull the cable end out from the accelerator pedal arm. Pass Cable Through Slot in Arm: Pass the cable through the slot in the accelerator pedal arm. Disconnect Remaining Cable Clips: Disconnect any remaining cable clips securing the cable. Remove Cable Through Firewall: Remove the cable through the firewall from the engine compartment side.